544510

Krups EA 8258 Manual

74
Zoom out
Zoom in
Previous page
1/330
Next page
Use and maintenance / SERIE EA 82xx
KRUPS Espresseria Automatic Premium
33
DEUTSCH
ENGLISH
FRANCAIS
NEDERLANDS
DANSK
SVENSKA
NORSK
SUOMI
ITALIANO
Problem Probable causes
Corrective actions
The coffee grinder
makes a strange
noise.
Foreign particles are inside the grin-
der.
✗ Contact KRUPS Customer
Service.
The grinder setting
button (13) is diffi-
cult to turn.
Has the grinder setting button been
moved when grinding was not taking
place ?
✗ Only turn the setting button
during grinding.
No steam comes
out of the steam
nozzle (21).
The nozzle or the nozzle support is
blocked.
The type of water used may not be
suitable initially for making steam (a hi-
gher calcium content may be needed).
✗ Remove the steam nozzle
from its support and unblock
these two parts using the clea-
ning wire.
✗ Empty the tank and remove
the Claris filter.
✗ Fill the tank with mineral water
high in calcium (> 100 mg/litre),
it may take as many as 5 to 10
cycles of steam to achieve a
continuous jet of steam. Once
you have a continuous jet of
steam you should not have to
use this particular type of water
again.
There is not enough
frothed milk.
Check that steam is coming out of
the nozzle.
Check if the small air inlet in the
upper part of the nozzle is blocked.
✗ Unblock the steam nozzle with
the cleaning wire.
✗ Unblock the inlet, dry it and if
necessary rinse it with water.
✗ We recommend using very
fresh pasteurised or UHT milk.
The frothed milk is
not thick enough.
Check if the two ends of the small
stainless steel tube are connected to
the steam nozzle.
✗ Correct the position of the
stainless steel tube.
The auto-cappuc-
cino accessory (op-
tional) does not
suck up the milk.
Check that the accessories are
connected correctly to one another
and that they are not blocked.
✗ Connect the accessories cor-
rectly to one another and un-
block them if needed.
After filling the water
tank (10), the war-
ning message re-
mains displayed on
the screen.
The water tank is not fitted correctly.
The float at the bottom of the tank
does not move freely.
The water tank is scaled.
✗ Fit the water tank correctly.
✗ Rinse the water tank under
water and descale if required.
The cleaning or des-
caling programme
will not start.
Programme error.
✗ Unplug the appliance then
plug it back in and switch it on.
Restart the programme.
… 74 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA 8258 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA 8258 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info