Manual Kruger AIRSEC 800 AF (page 17 of 20) (English, German, French, Italian)

495040

Zoom out

Zoom in

1/20

HOW IT WORKS

Moist air from the room is moved by

a fan over a cold coil connected to

the refrigeration unit. The humidity

condenses on the coil and drops down

as water into the collector. The air is

then reheated by the condenser to its

incoming temperature before being

released back into the room.

INSTRUCTIONS

Transportation and storage

The machine should whenever possible

be transported in an upright position. If

it is transported on its side, the machine

must be placed in an upright position

and left for at least two hours before

being connected to the mains and

started.

If the machine is not going to be used

for a significant period of time, the wa-

ter tank and housing must be cleaned

with a damp cloth and then rubbed dry

before storage.

Installing the dehumidifier

• Fit the enclosed fixing rail to the wall

(if possible, on an internal wall to

prevent the build-up of condensati-

on behind the machine)

• Attach the machine to this rail and

secure with the left and right-hand

screws

• Ensure a safe distance of 8 cm to

flammable parts

• Operating temperatures:

min. + 8 ∞C, max. + 30 ∞C

Water drainage

Water should, wherever possible, be

drained away directly.

• Attach the connection piece (special

accessory) to the direct discharge

outlet (6) on the underside of the

unit

• Slide the hose (special accessory)

over the connection piece

• Place the hose end in the discharge

pipe (preferably with an air trap)

If the water is collected in a bucket, the

bucket must be checked regularly and

always emptied. Depending on the

temperature and moisture content of

the air, the bucket can fill 1–2 times

daily.

Failure to empty the bucket will lead

to water damage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kruger AIRSEC 800 AF in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kruger AIRSEC 800 AF Manual

Product: