705168
11
Zoom out
Zoom in
Previous page
1/16
Next page
7.1 Channel Surround Sound Setup
The 7.1 channel surround sound setup adds two speakers to the sides of the mix position
and is most similar to the actual surround sound configuration of cinema—with the
difference being that cinemas commonly add additional side surrounds to compensate for
the length of the theater.
The front Left and Right speakers typically form a wider triangulation (in relation to the mix
position) than that of a 5.1 setup so as to more accurately replicate the fact that in cinema,
the front speakers are not angled toward the center, but rather face straight out into the
theater—as is also the case for the mix stage in film sound mixing. The Center channel
loudspeaker is positioned directly in the center as is the case in a 5.1 surround setup.
Similarly, the subwoofer is most effective when situated directly below the center channel.
If this is not possible place the subwoofer just to the right or left side and below the Center
channel.
Like the three front speakers, the Left and Right surround speakers are positioned at
equidistance from the mix position directly to the sides. Finally, the Left and Right rear
surround speakers are placed behind the mix position at equidistance to the mix position.
The 7.1 channel surround sound environment is one of total immersion, and is the best
choice for mix environments where sound needs to be detectable side to side, along with
front to rear.
Once the monitors have been placed, you’ll need to adjust the System Gain pots for each
monitor so that all channels have exactly the same SPL output at the listening position.
Although this can be done simply by listening to each channel one at a time and adjusting
for relative levels, we recommend using an SPL meter and filtered noise (pink noise) to test
each channel independently. Simply take a reading from each monitor, and then adjust all
the monitors to match your lowest SPL reading. Your system levels should now be
balanced for multi-channel surround.
Figure 4
11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KRK Systems VXT Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KRK Systems VXT Series in the language / languages: English as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info