IMPORTANT: Before starting up the subwoofer, be sure all connections are made, all
fader and controls should be set at their minimum levels, and all other equipment
should be powered prior to powering up your KRK subwoofer. If you are connecting
the subwoofer outputs to your monitors, turn monitor power on after the subwoofer.
KRK subwoofers include a built-in crossover and amplifier so you only need the appropriate cables to connect one into your existing system. First, you’ll need to connect a pair of
cables from the stereo outputs of your audio source to the left and right RCA, XLR or ¼” TRS input jacks on the subwoofer. Next, hook the corresponding output jacks on the
subwoofer to the inputs of your studio monitors. NOTE: If you are using the RCA inputs but either the XLR or TRS outputs you may need to adjust the INPUT SENSITIVITY to HIGH if
you are not getting sufficient audio signal.
If you chose to use an external crossover with your KRK subwoofer, run your audio signal to the crossover inputs. Next, connect the low frequency output to the KRK subwoofer
and the high and/or mid frequency output to your studio monitors. You will need to adjust levels on both your subwoofer and studio monitors to make sure the levels match.
Subwoofer Hook Up with Active Monitors
If you are using active (powered) monitors, use an XLR or ¼” cable to connect the output of the subwoofer directly to the input of the monitor. The output marked "Left" should
go to your left monitor, and the output marked "Right" should go to your right monitor.
Subwoofer Hook Up with Passive Monitors
If you are using passive (non-powered) monitors, use an XLR or ¼” cable to connect the output of the subwoofer directly to the input of the monitor’s external power amplifier,
and then connect the power amplifier speaker output to the monitors.
NOTE: DO NOT connect the speaker output of the monitor’s external amplifier to the input of the subwoofer. This will cause permanent damage.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for KRK Systems 8S at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of KRK Systems 8S in the language / languages: English, German, French, Spanish as an attachment in your email.
The manual is 0,78 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
