818711
16
Zoom out
Zoom in
Previous page
1/148
Next page
16
EN
Troubleshooting
If your MissionTM RTKn does not work correctly, follow the trouble shooting guide below. If the fault persists,
contact your dealer.
Symptom Cause Solution
The LED light on the charging
base does not turn on. There is no power.
Check the charging base is connected
properly to the charger and the charger
is connected to a suitable power supply.
MissionTM RTKn cannot
correctly dock with the
charging base.
The magnetic strip is placed in
the wrong direction.
Check if the magnetic strip is placed
in the wrong direction. When correctly
placed, the green stripe of the magnetic
strip is facing away from the charging
base.
Machine runs out of power
but does not return to
charging base.
No virtual charging base is
mapped.
Rebuild the map and add the virtual
charging base.
The length of the magnetic strip
is less than 2.5 m.
The length of the magnetic strip should
be guaranteed to be greater than 2.5 m.
When MissionTM RTKn is going
downhill, it overruns the
boundary line.
The angle of the border line is
very sharp.
Try to avoid layout scenarios with sharp
angles.
After MissionTM RTKn is
turned on, the start button is
pressed, but MissionTM RTKn
does not work.
MissionTM RTKn is outside the
working area.
Move MissionTM RTKn inside the working
area.
Poor positioning signal
Find an open place, wait for the
positioning signal light to turn green, and
then press start button.
MissionTM RTKn does not give
an alarm when it is outside
the Geo fence.
The software of MissionTM RTKn
itself is not the latest.
Update the software of the MissionTM
RTKn.
MissionTM RTKn is powered off. Turn MissionTM RTKn on.
MissionTM RTKn is parked in
the middle of the obstacle.
The obstacles around MissionTM
RTKn are relatively small, and
MissionTM RTKn fails to get out
of trouble.
Set the area where MissionTM RTKn is
easily trapped as No-Go.
The sensor of MissionTM RTKn is
abnormal
Detect MissionTM RTKn's diagnostic
page on the APP and check the sensor
status.
Unable to read log The format of U-disk is not
FAT32.Convert the format of U-disk to FAT32.
MissionTM RTKn is parked
around the wall and
cannot be started, and the
positioning light is always on
red.
MissionTM RTKn works in the
shaded area for too long,
triggering the safety protection. Try to avoid letting MissionTM RTKn mow
in areas with too much shade.
There are too many walls or
trees in the area, blocking the
positioning signal.
Environmental protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress KR160E.A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress KR160E.A in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 22.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info