818716

Kress KR121E Manual

11
Zoom out
Zoom in
Previous page
1/136
Next page
11
EN
1
2
Usually your MissionTM's blades need to be reversed each month and replaced each 2 months. When
replacing the blades, make sure to replace all of them at the same time. You can replace them with one of the
spare blade kits and extra blade screws supplied with your MissionTM.
Before attempting to replace your MissionTM’s
blades, turn the power off and put on protective
gloves and follow these steps:
1. Gently flip the MissionTM over.
2. Remove the battery cover and remove the
battery.
3. Take the screws off the blades with a
screwdriver.
4. Firmly screw on the new blades.
5. Refit the battery and the battery cover.
Important: After screwing the blade to the
blade disc, make sure the blade is able to spin
freely.
A. Replace the blades
The Mission
TM
does not cut grass like other mowers.
Its cutting blades are razor sharp on 4 edges and
rotate in both directions for maximum cutting
capacity. Each blade of your Mission
TM
has 4 cutting
edges. The blade turning disc will make forward
and reverse rotation at random to use 4 cutting
edges and minimize the frequency of replacing the
blades. And with new material, the service life of
each cutting blade will be 3 times longer than that of
other brands’ when it is programmed to mow every
day. Always check to see if the blades are chipped
or damaged and replace them if they are. When the
cutting blades are dull and worn out, they should be
replaced with the spare blades provided with your
Mission
TM
. Spare blades are also available at your
nearest Kress retailer .
1
WARNING: Before cleaning, adjusting, or replacing the blades, turn your Mission
TM
OFF and
put on protective gloves.
WARNING: When fitting new blades, make sure you replace ALL the blades. Always use new
screws when fitting blades. This is important to ensure blade retention and balance the blade
turning disc. Failure to use new screws could cause serious injury.
Keep it Sharp
WARNING: Before cleaning, turn your Mission
TM
OFF. Put on protective gloves before cleaning
the blade turning disc and do not rinse or flush with water.
Keep it Clean
2
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress KR121E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress KR121E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 17.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info