818709
16
Zoom out
Zoom in
Previous page
1/156
Next page
16
EN
Battery charge error.
1) Battery’s temperature is too high (more than 550C) when charging.
Place the charging base in a shady area or wait until the temperature
has cooled down.
2) Battery’s temperature is too low. The outside temperature doesnt
allow your
Mission
TM
NANO
to work. It’s time to recover it for winter
time.
3) Poor connection: check the connection between the contact pins
located on the charging base and the charging strip and that the
charging base is on a perfect flat ground.
4) Power supply is broken: please contact Customer Services.
Error find home
timeout.
1) Charging base is badly placed (not on a flat ground),
Mission
TM
NANO
doesn’t find pins and doesn’t stop. Check the base.
2)
Mission
TM
NANO
runs out of battery before reaching the charging
base. The extended boundary wire should not exceed 350 meters.
With the ‘Lock
Function’ enabled, if
your
Mission
TM
NANO
does not receive
a signal from your
Wi-Fi router for 3
days, then it gets
locked as a security
measure.
This could be
because your
router lost its power
or because you
changed your Wi-Fi
router or network
provider.
Please reconnect
Mission
TM
NANO
to the Wi-Fi network it has been
originally paired with.
If this is not possible, contact Customer Service.
Module software
update failure
occurs.
Please check that the module is correctly connected. Check that the
file copied in the USB stick is not damaged.
Turn power off, then turn it on and try the software update again.
Software update
failure occurs. Please try the software update again or contact Customer Service.
NOTES
Before turning power on, always check
Mission
TM
NANO
is inside its working area.
If for any reasoni.e. a party, children playing...you want to park your
Mission
TM
NANO
in the charging
base: press HOME then OK.
Mission
TM
NANO
will go to its base and stay there. Please note
Mission
TM
NANO
will now wait until the next scheduled mowing session. If you want to re-start it at anytime, press START
then OK to start your
Mission
TM
NANO
.
If an error repeatedly occurs in the same area of your lawn, you might have a problem with the boundary
wire so please refer to the installation instructions and check your set up is correct with its help.
If your lawn is divided in two separated areas, connected by a corridor less than 1m wide, one of which
is not provided with the charging base: when
Mission
TM
NANO
runs out of charge, take it manually to the
charging base.
If
Mission
TM
NANO
runs abnormally once in a while, please reset it by turning it off and removing the battery
for 30 seconds, then restart it. If the problem cannot be solved, please contact our Customer Service for
help.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress KR101E - Mission Nano 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress KR101E - Mission Nano 600 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 11.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info