818709
13
Zoom out
Zoom in
Previous page
1/156
Next page
13
EN
1. Connect the charging base to a suitable power
supply. The green light on the charging base will
turn on.
2. Manually dock the MissionTMNANO into the
charging base while the MissionTMNANO is
powered off.
3. The green light on the charging base will be
flashing. MissionTMNANO will begin to charge.
1. Gently turn your MissionTMNANO upside down.
2. Remove the screws on the battery cover.
Remove the battery cover.
MissionTMNANO can be charged manually without
the boundary wire.
If you need to replace the battery, follow these
steps:
Your
MissionTMNANO
will live longer and healthier if it is allowed to hibernate. So even though it is tough, we
recommend storing your
MissionTMNANO
in your shed or garage during the winter.
Before you prepare your
MissionTMNANO
for winter hibernation, we recommend you:
Thoroughly clean your
MissionTMNANO
Fully charge the battery
Turn the power off
To maximize the battery life, fully charge the battery before storage during winter.
WARNING: Protect the underside of Mission
TM
NANO from water. NEVER store Mission
TM
NANO
upside down outdoors.
The boundary wire can be left in the ground although its ends should be protected, such as placed in a tin can
with grease. If the charging base is left outside for the winter, leave the boundary wire connected.
NOTE: When bringing the
MissionTMNANO
back to work after winter hibernation, make sure the charging strips
and contact pins are clean. We recommend using a fine grade emery cloth to clean the contacts. Using the
app, make sure the date and time are correct and send
MissionTMNANO
back to what it loves doing: mowing.
Winter Hibernation
4
WARNING: Power off before attempting any adjustment, replacement or repair.Before
replacing the blades, turn your MissionTMNANO OFF and put on protective gloves.
Replacing the battery
5
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress KR101E - Mission Nano 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress KR101E - Mission Nano 600 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 11.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info