819115
14
Zoom out
Zoom in
Previous page
1/332
Next page
14
EN
BLADE BALANCING (SEE FIG. N)
Check balance of blade by placing center hole in
blade N-1 over a screwdriver shank N-2, clamped
horizontally in a vise N-3. If either end of the blade
rotates downward, le that end. Blade is properly
balanced when neither end drops.
N
N-2
N-3
N-1
BLADE REPLACING
-Suggest to replace different mower blades
according to different working conditions for
better using experience.
BLADE
FUNCTION
High-lift blade Recommended for
bagging
Gator blade Recommended for
mulching
CLEANING
1. Stop the mower and remove the battery.
2. Do not use aggressive detergents or solvents.
Clean the machine after use with a damp cloth
dipped in mild detergent.
3. Keep battery connection free of dirt and debris,
and clean with a soft and dry brush or cloth.
4. Do not spray water onto the motor and electrical
components.
5. Do not use pressure washer to clean your
machine.
Cleaning the deck and the blade area. (See
Fig. O)
Cleaning grass clippings and debris off of the deck
and the blade area.
If grass cuttings are compacted in the blade area,
remove with a wooden or plastic implement.
O
Cleanig the wheels. (See Fig. P)
- Stop the mower and remove the battery.
- Cleaning the wheels every 50 hours or more
frequently in extreme conditions.
- Remove the rear wheels and clean the grass
clippings and debris from the wheel-gear area.
- It is suggested to apply a small amount of anti-
seize compound to the gears(e) after cleaning.
P
e
e
Cleaning the air filter (See Fig. Q1, Q2)
1. Clean the area around the air lter. Use a damp
cloth or a soft brush.
2. Unscrew and remove the air lter.
3. Wash the air lter with running water to remove
the dirt.
4. Allow the air lter to dry in the air. And then install
it in the housing by thghtening the screw.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress KC720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress KC720 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 103.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info