819115
10
Zoom out
Zoom in
Previous page
1/332
Next page
10
EN
C2
Checking the battery charge condition and
charging the battery pack.
NOTE: The batteries are shipped uncharged. The
battery must be fully charged before the rst mow.
More details can be found in the manual of battery
and charger.
Fitting/removing the battery (See Fig. D)
D
Checking the controls
1. Remove the battery.
2. Try to press the on/off switch, cutting blade
start button, or cutting speed control. If the on/
off switch, cutting blade start button, or cutting
speed control gets stuck and cannot spring back
to its origianl position, stop using the mower and
contact the service agent.
3. Try to pull and release the operatng bail or
self-propel engagement bail. If the operatng bail
or self-propel engagement bail gets stuck and
cannot spring back to its original position, stop
using the mower and contact the service agent.
4. Rotate the self-propel speed control. If the self-
propel speed control gets stuck, stop using the
mower and contact the service agent.
Checking the display (See Fig. E)
1. Fit the battery.
2. Keep pressing the on/off switch and the battery
indicator (a ) and cutting speed indicator (c)
become lit.
3. Press the cutting blade start button and pull the
operatng bail to start the machine.
4. If the warning indicator (d) is ashing, refer to
Troubleshooting
for solutions.
5. Release the operatng bail. The blade stops
rotating after a short delay. If the mower cannot
stop, remove the battery and contact the service
agent.
LED indicators
a. BATTERY INDICATOR
b. BLUETOOTH INDICATOR
c. CUTTING SPEED INDICATOR
d. WARNING INDICATOR
NOTE: The warning indicator will ash red or yellow
when the machine malfunctions. If the red light
ashes, please seek assistance from the dealer. If the
yellow light ashes, switch off the machine, remove
the battery pack, then re-t the battery pack and
switch on the machine. If the yellow light continues
to ash, please seek assistance from the dealer.
E
START
b
c
a
d
Adjusting the cutting height (See Fig. F)
Adjust the cutting height through cutting height
adjustment levers of front and rear wheel.
NOTE: Ensure that the front and rear wheels are kept
in the same position when adjusting the height.
F
1——20 mm
2——30 mm
3——40 mm
4——50 mm
5——60 mm
6——70 mm
7——80 mm
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress KC720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress KC720 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 103.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info