Manual Kress KC720.X (page 10 of 332) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

819116

Zoom out

Zoom in

1/332

Checking the battery charge condition and

charging the battery pack.

NOTE: The batteries are shipped uncharged. The

battery must be fully charged before the rst mow.

More details can be found in the manual of battery

and charger.

Fitting/removing the battery (See Fig. D)

Checking the controls

1. Remove the battery.

2. Try to press the on/off switch, cutting blade

start button, or cutting speed control. If the on/

off switch, cutting blade start button, or cutting

speed control gets stuck and cannot spring back

to its origianl position, stop using the mower and

contact the service agent.

3. Try to pull and release the operatng bail or

self-propel engagement bail. If the operatng bail

or self-propel engagement bail gets stuck and

cannot spring back to its original position, stop

using the mower and contact the service agent.

4. Rotate the self-propel speed control. If the self-

propel speed control gets stuck, stop using the

mower and contact the service agent.

Checking the display (See Fig. E)

1. Fit the battery.

2. Keep pressing the on/off switch and the battery

indicator (a ) and cutting speed indicator (c)

become lit.

3. Press the cutting blade start button and pull the

operatng bail to start the machine.

4. If the warning indicator (d) is ashing, refer to

Troubleshooting

for solutions.

5. Release the operatng bail. The blade stops

rotating after a short delay. If the mower cannot

stop, remove the battery and contact the service

agent.

LED indicators

a. BATTERY INDICATOR

b. BLUETOOTH INDICATOR

c. CUTTING SPEED INDICATOR

d. WARNING INDICATOR

NOTE: The warning indicator will ash red or yellow

when the machine malfunctions. If the red light

ashes, please seek assistance from the dealer. If the

yellow light ashes, switch off the machine, remove

the battery pack, then re-t the battery pack and

switch on the machine. If the yellow light continues

to ash, please seek assistance from the dealer.

START

Adjusting the cutting height (See Fig. F)

Adjust the cutting height through cutting height

adjustment levers of front and rear wheel.

NOTE: Ensure that the front and rear wheels are kept

in the same position when adjusting the height.

1——20 mm

2——30 mm

3——40 mm

4——50 mm

5——60 mm

6——70 mm

7——80 mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kress KC720.X in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 103.63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kress KC720.X Manual

Product: