389720

Kress cds 6425 exl Manual

7
Zoom out
Zoom in
Previous page
1/30
Next page
The grinding tools are simply pressed onto the grinding
disc or flap attachment. The bore holes of the abrasive
paper and the grinding disc will automatically coincide
when fitted properly. This facilitates the trouble-free
extraction of sanding dust when using a vacuum cleaner.
Working with the triangular grinder.
Begin with coarse paper, gradually replacing it with finer
paper until the desired grinding results have been
achieved. We recommend slightly overlapping one piece
with the other piece. When grinding, simply guide the
machine while pressing down slightly. We do not
recommend pressing down heavily on the machine, as
higher working pressure reduces the number of strokes
and consequently the grinding performance. The
machine should be turned on before it is applied to the
work piece and should not be turned off until it has been
removed from the work piece after grinding (grain marks
due to slowdown).
Full-wave electronics
(CDS 6425 EXL).
This triangular grinder has a built-in full-wave electronic
unit. It allows you to optimally adjust the speed to the
work piece and the applied abrasive paper and is con-
trolled by means of the adjusting wheel (2). The working
speed is dependent upon numerous factors (e.g. the type
and grade of the material and the type, quality and grain
size of the applied abrasive paper).
Application examples
Application Grain Electronics
setting
Sanding body-work damage 180 ... 400 3 ... 5
Sanding old lacquer 0 60 ... 804 ... 5
Grinding lacquered 120 ... 400 2 ... 4
surfaces
Grinding natural wood 0 60 ... 2402 ... 5
Rough-grinding glass fiber 0 60 ... 802 ... 5
reinforced plastics
Precision-grinding glass fiber180 ... 400 2 ... 5
reinforced plastics
Derusting steel 0 60 ... 120 2 ... 4
Vacuum cleaner connection.
The vacuum connection piece (7) allows you to eliminate
sanding dust using a commercial vacuum cleaner. This is
particularly advantageous when working over a longer pe-
riod of time. Removing the sanding dust also increases the
grinding performance and service life of the grinding paper.
Maintenance and repair.
Dust and dirt is produced by every tool when working
with wood. Proper maintenance is therefore imperative.
Ensure that all openings, in particular those required to
cool the motor, are always free of dust and dirt.
All movable parts are sufficiently lubricated before
leaving the factory. The grinder requires very little
maintenance.
Replacing the graphite brushes.
As with all service work, brush replacement is carried
out quickly and easily by our service locations.
Mains cable.
Damaged mains cables must not be used.
They should be replaced immediately at an authorised
KRESS Service Point
With the CDS 6425 EXL
thanks to the innovative mains
cable with patent quick-release lock (6) it is possible for
you to replace the cable with the greatest of ease
.
Press
the two lock pushbuttons (5) and pull the mains cable (6)
out of the casing. Feed the new mains cable into the hand
grip until it snaps in place.
Various cable lengths are available upon request.
Only use the mains cable with patent quick-release lock
for KRESS power tools! Do not attempt to operate
other electrical appliances with it!
Faulty mains cables may only be repaired at an
authorised KRESS Service Point.
Optional accessories:
Spare grinding disc
Flap attachment
Abrasive paper, triangular/K 60–400
Abrasive paper, hexagonal/K 60–400
(make sure that the size is correct)
Noise/vibration information:
Measured values determined according to EN 60745.
Typically the A-weighted noise levels of the machine
are: sound pressure level 81 dB (A); sound power level
92 dB (A). Measurement uncertainly K = 3 dB.
Wear hearing protection!
The typically weighted acceleration is 3.85 m/s
2
.
Environmental protection
Recycle raw materials instead of
disposing as waste
We reserve the right to make changes in accordance with
technical advancement.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress cds 6425 exl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress cds 6425 exl in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info