508066
7
Zoom out
Zoom in
Previous page
1/16
Next page
English
7
Application
The Pneumatic Drill Hammer can be used universally
for impact drilling, for light chiselling work in masonry
and for drilling as well as screwdriving in wood, metal
and plastic.
Before putting the machine into operation, read
through these operating instructions completely and
observe the safety instructions contained therein as
well as those in the enclosed booklet on general
safety instructions for electro-tools.
If the mains cable is damaged while working, pull
the mains plug immediately.
Never work with a damaged mains cable.
Wear protective glasses, hearing protection, pro-
tective gloves and sturdy shoes.
Wear hearing protection. Exposure to noise
can cause hearing loss.
Do not work with materials containing asbestos.
Do not carry the machine by the cable.
The mains receptacles in the working area must be
protected by a residual current circuit breaker (RC).
For the attachment of identification markings on the
machine, do not drill into the housing. The protec-
tive insulation would be shorted. Use stickers.
When the drill unexpectedly jams, the machine
kicks back. Therefore, always take a secure stance
and hold the machine firmly with both hands.
1
Tool holder
2
Dust protection cap
3
Unlocking collar
4
Rotation stop switch
5
Locking button for on/off switch
6
On/Off switch/Speed control
7
Ventilation slots
8
Latch for mains cable module
Measurement uncertainty K = 1,5 m/s
2
.
9
Rotational direction switch
10
Drilling/Impact drilling selector
11
Holder for depth stop
12
Auxiliary handle
13
Adapter for screwdriver bits/drill chuck
Accessories illustrated or described are not
always included as standard delivery items.
Measured values determined according to
EN 60 745.
Typically the A-weighted noise levels of the machine
are: sound pressure level LpA = 89 dB (A);
sound power level LwA = 100 dB (A).
Measurement uncertainty K = 3 dB.
Wear hearing protection!
The typically weighted acceleration is a
h
= 8,5 m/s
2
.
1
Safety Instructions and
Accident Prevention
2 Illustration
3
Technical Data
Pneumatic Drill Hammer
Article number
Input power
Output power 300 W
Electronic speed control
No-load speed 0-1050 RPM
Speed under load 0-800 RPM
Impact frequency under load
during hammer drilling max.
Impact energy
Right/Left rotation
Clamping collar dia. 43 mm
Euro standard
Tool holder SDS-Plus
Drill dia., max.
Steel 13 mm
Light metal
Wood 30 mm
Recommended hammer drilling
Screw dia., max.
Sheet metal 6.3 mm
Weight 2.7 kg
Protection class II /
4 Noise/vibration information
MBH 2002 - Titel.book Seite 7 Freitag, 10. August 2001 7:52 07
Use the auxiliary handles supplied with the
machine. Loss of control can cause personal
injury.
BMH 650
BMH 650
650 W
2.4 J
Hammer drilling in conctrete 24 mm
range 4-16 mm
Wood 8 mm
5194 per min.
0428 2645
18 mm
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress 650 BMH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress 650 BMH in the language / languages: English, German, French as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info