508071
10
Zoom out
Zoom in
Previous page
1/136
Next page
10 English Tools and accessories
RSEA-EN / 1002
EN
On/off
Switch the unit on using the rotary switch I on the
upper part 1; (or switch to automatic or vibration
mode).
Suction cleaning
The suction force of appliances with a handle tube
can be matched to the object being suction
cleaned with the secondary air slide.
Dry suction cleaning
Dry suction cleaning must only be performed with
a dry filter, appliance and accessories so that the
dust cannot adhere and become encrusted.
If the appliance is used to vacuum soot, cement,
gypsum, flour and similar dusts, it is advisable to
use a paper filter bag, and an additional FSP filter
sack when larger quantities are involved.
The paper filter bag must always be used in con-
junction with a second filter.
Wet suction cleaning
Suction cleaning is performed without a paper fil-
ter bag and without a filter sack. The folded filter is
suitable for wet suction cleaning.
An FSS foam filter should be used for larger quan-
tities of water. The float valve interrupts suction
when the container is full. Turn off the motor and
empty the container and, if necessary the folded
filter.
When taking up water, the supplementary air slide
on the handle should be opened slightly.
Always lift the suction hose out of the liquid before
switching off.
Due to the high suction force and flow-promoting
container shape, some water may flow out of the
hose when the appliance is switched off.
The float valve can respond prematurely when
larger quantities of fluid are sucked up. Turn off
the appliance, remove the filter and empty out the
water.
The filter can be dispensed with when liquid is pri-
marily sucked up.
A second (exchangeable) filter should be used for
frequent changeover between dry and wet suction
cleaning.
Turn off I, disconnect the plug 4, and open the
lock-in closure 12. Remove the top section 1 and
hose from the container 10. Empty the container
or remove the paper filter bag 16 from the suction
opening.
5. Tools and accessories
Operation
0 Sucker >off<
I min Sucker >on< (manual mode) reduced
suction performance
I max Sucker >on< (manual mode) full suc-
tion performance
AR Stand-by mode for automatic ON/
OFF switching. (Sucker is switched
on and off by the electr.-tool). Also, if
the suction performance deteriorates,
however at the latest when the vol-
ume flow display lights up, the filter
cleaning function is switched on auto-
matically for approx. 7 seconds. To
do this, the sucker uses the work
break, i.e. the electr.-tool needs to be
switched off or be off.
-Note-
Use a dry filter for subsequent dry suction clean-
ing.
Emptying the container
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress 1400 RS EA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress 1400 RS EA in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info