508067
9
Zoom out
Zoom in
Previous page
1/16
Next page
BMH 1000 English 7
Application
The Pneumatic Drill Hammer can be used universally
for impact drilling, for light chiselling work in masonry
and for drilling as well as screwdriving in wood, metal
and plastic.
Before putting the machine into operation, read
through these operating instructions completely and
observe the safety instructions contained therein as
well as those in the enclosed booklet on general
safety instructions for electro-tools.
If the mains cable is damaged while working, pull
the mains plug immediately.
Never work with a damaged mains cable.
Wear protective glasses, hearing protection, pro-
tective gloves and sturdy shoes.
1
Safety Instructions and
Accident Prevention
2 Illustration
3 Technical Data
Pneumatic Drill
Hammer BMH 1000
Article number 0428 3512
Input power 1000 W
Output power 600 W
Electronic control
Full wave electronic
No-load speed
1st Gear 125-875 RPM
2nd Gear 250-2000 RPM
Speed under load
1st Gear max. 800 RPM
2nd Gear max. 1850 RPM
No-load impact rate 4700/min max.
Load hammer blows 4300/min
Right/Left rotation
Clamping collar dia. 43 mm
Euro standard
Tool holder SDS-Plus
Drill dia., max.
Steel 16 mm
Light metal 25 mm
Wood 50 mm
Hammer drilling in
conctrete 28 mm
Recommended
hammer drilling
range 4-16 mm
Screw dia., max.
Wood 8 mm
Sheet metal 6.3 mm
Corner measure 42 mm
Weight 2.8 kg
Protection class II/
4 Noise/vibration information
BMH 1000 - Buch Seite7 Donnerstag 29. Mai 2006
Measured values determined according to
EN 60 745.
Typically the A-weighted noise levels of the machine
are: sound pressure level 96 dB (A); sound power level
107 dB (A). Measurement uncertainty
K = 3 dB.
Wear hearing protection!
The typically weighted acceleration is 7,8 m/s
².
Do not work with materials containing asbestos.
Do not carry the machine by the cable.
The mains receptacles in the working area must be
protected by a residual current circuit breaker (RC).
For the attachment of identification markings on the
machine, do not drill into the housing. The protec-
tive insulation would be shorted. Use stickers.
When the drill unexpectedly jams, the machine
kicks back. Therefore, always take a secure stance
and hold the machine firmly with both hands.
1 Tool holder
2
Dust protection cap
3 Unlocking collar
4 Gear selector/Rotation stop switch
5 Ventilation slots
6 Rotational direction switch
7 Locking button for on/off switch
8 On/Off switch
9 Speed selection knob
10 Drilling/Impact drilling selector
11 Holder for depth stop
12 Auxiliary handle
13 Latch for mains cable module
14 Adapter for screwdriver bits/drill chuck
Accessories illustrated or described are not
always included as standard delivery items.
Wear hearing protection. Exposure to noise
can cause hearing loss.
Use the auxiliary handles supplied with the
machine. Loss of control can cause personal
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kress 1000 BMH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kress 1000 BMH in the language / languages: English, German, French as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info