770011

Kreator-Varo KRT706500 Manual

8
Zoom out
Zoom in
Previous page
1/10
Next page
KRT706500 EN
Copyright © 2019 VARO P a g e | 8 www.varo.com
▪ Press button 1 again to measure the length and press button 1 again to measure the width
of the rectangle. The measurement area will be displayed at the most downtrend of the
display screen.
8.13 Volume measurement
▪ Press button 2 four times to enter volume measurement mode. The volume icon (B) will be
displayed.
▪ Press button 1 again to measure the length, press button 1 again to measure the width
and press button 1 again to measure the height of the cube. The measurement volume will
be displayed at the most downtrend of the display screen.
8.14 Addition measurement
▪ Press button 2 five times to enter addition operation measurement mode. The addition
icon (+) will be displayed.
▪ Press button 1 again to make a single measurement, continue to make a single
measurement. The cumulative value of the two measurements will be displayed at the
most downtrend of the display screen. Keep doing as many single measurements as
needed.
▪ The measurements of n times have always been cumulative and displayed on the most
downtrend of the display screen.
8.15 Subtraction measurement
▪ Press button 2 six times to enter subtraction operation measurement mode. The
subtraction icon (-) will be displayed.
▪ Press button 1 again to make a single measurement, continue to make a single
measurement. The cumulative value of the two measurements will be displayed at the
most downtrend of the display screen. Keep doing as many single measurements as
needed.
▪ The measurements of n times have always been cumulative and displayed on the most
downtrend of the display screen.
8.16 Message code
Message code
Possible Cause
Remedy
Err01
The reflected laser signal is
too strong.
Change the target or affix a
piece of white paper to the
target.
Err02
The distance to be measured
is beyond the measuring
range. The specified
measuring range of this
instrument is 0.05~20m
Measure within the effective
measuring range.
Err03
The target which the laser
beam aims at is weak at
reflecting the laser beam.
Change the target or affix a
piece of white paper to the
target.
Err06
Low battery
Replace with a new battery
9 MAINTENANCE AND STORAGE
▪ Check the measuring tool each time before use. In case of visible damage or loose
components inside the measuring tool, safe function can no longer be ensured.
▪ Keep the measuring tool clean and dry at all times to ensure proper and safe working.
▪ Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or solvents.
… 8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kreator-Varo KRT706500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kreator-Varo KRT706500 in the language / languages: English as an attachment in your email.

The manual is 0.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kreator-Varo KRT706500

Kreator-Varo KRT706500 User Manual - German - 11 pages

Kreator-Varo KRT706500 User Manual - Dutch - 11 pages

Kreator-Varo KRT706500 User Manual - French - 11 pages

Kreator-Varo KRT706500 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info