813956

Kratki WK440 Manual

32
Zoom out
Zoom in
Previous page
1/338
Next page
32
EN
close the air intake by turning the lever clockwise.
THE JUNO SERIES
The JUNO free-standing space-heater series has been designed with your comfort and enjoyment in
mind, in accordance with the highest safety and quality standards, as well as combining unique sty-
lishness and looks.
Please nd all further useful information, including technical data, chimney air-circulation diagram,
glass-replacement diagram, door-removal and -replacement diagram, and the Acumotte lining dia-
gram and replacement diagram in the nal sections of this Manual.
APPLIANCE DESCRIPTION AND DESIGN
The steel shell is a principal part of the heater (Figure 14), containing the combustion chamber. The
combustion chamber front wall consists of a steel door tted with homogeneous heat-proof glass
and a closing lock.
The door is set in special holders of the appliance body. The combustion chamber is lined with Acu-
motte panels. The base of the rebox consists of a two-shell oor which also forms the air-intake cham-
ber. The air intake is made with the external air intake connector with a diameter of  = 125 mm, tted
with a control device.
The base supports a cast-iron re grate, on which fuel is burnt. The re grate should be laid with its
ns facing upwards.
The burnt waste: ash and residual fuel accumulate in a replaceable ash pan situated under the re
grate.
There is a steel bae over the combustion chamber. The baes provide a natural convection conduit
for ue-gas ow to enhance heat exchange.
The air is controlled with a lever. Open the primary air supply by moving the control lever to the left-
most position, and close the air intake by moving the lever to the rightmost position.
During the rebox’s operation, the ue gases ascend the walls of the combustion chamber, then they
move under the bae and continue up to the ue pipe to get to the chimney via the smoke duct.
The air damper is tted in the air-intake duct outside the building and it controls the amount of air
taken in by the replace to ensure the optimal burning process.
THE THOR SERIES
The THOR free-standing space-heater series has been designed with your comfort and enjoyment in
mind, in accordance with the highest safety and quality standards, as well as combining unique sty-
lishness and looks.
Please nd all further useful information, including technical data, chimney air-circulation diagram,
glass-replacement diagram, door-removal and -replacement diagram, and the Acumotte lining dia-
gram and replacement diagram in the nal sections of this Manual.
APPLIANCE DESCRIPTION AND DESIGN
The steel shell is a principal part of the heater (Figure 18), containing the combustion chamber. The
combustion chamber front wall consists of a steel door tted with heat-proof glass and a handle.
The door is set in special holders of the appliance body. The combustion chamber is lined with Acu-
motte panels. The base of the rebox consists of a two-shell oor which also forms the air-intake cham-
ber. The air intake is made with the external air intake connector with a diameter of  = 125 mm, tted
with a control device.
The base supports a cast-iron re grate, on which fuel is burnt. The re grate should be laid with its
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kratki WK440 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kratki WK440 in the language / languages: English, German, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info