813949

Kratki Orbit Manual

28
Zoom out
Zoom in
Previous page
1/338
Next page
28
EN
air-supply control tted below the door.
With the primary air control set to the full open position, the greatest volume of air is supplied to the
combustion chamber under the hearth, thanks to which intense fuel burning occurs. The rated values
of the stove are achieved with the primary air control 50% open.
EXTINGUISHING
To extinguish the re, close the primary air supply completely, which will result in the fuel’s burning
out on its own.
When quick ame quenching is necessary, cover the hearth chamber with dry sand or ash. Extingu-
ishing the stove with water is not allowed, as it puts its components at risk of damage.
FREE-STANDING SPACE-HEATER MAINTENANCE
Stove Maintenance. The stove and smoke-duct-maintenance activities consist of ensuring that the
guidelines below are followed. Regular or scheduled stove-maintenance activities involve removing
the ash, cleaning the front glass, cleaning the combustion chamber, and cleaning the chimney ue.
CHIMNEY-FLUE MAINTENANCE
A well-cleaned and maintained chimney provides the basis for correct and safe stove operation. The
user must clean the chimney in accordance with the valid regulations. How often you clean and per-
form the maintenance depends on the chimney insulation and the type of wood used. Using unse-
asoned wood with a humidity above 20%, or softwood, will pose the risk of a chimney re related to
a thick layer of ammable creosote deposits, which must be removed regularly. Failing to remove the
creosote layer inside the chimney liner causes sealing damage, and also contributes to corrosion build-
-up. Consequently, the regular inspection and maintenance of the stove and its related components
are required.
HEARTH CLEANING
Before and after each heating season, the hearth must be cleaned and checked carefully, as leaving ash
in the ash drawer over a longer time will cause its chemical corrosion. During operation, regular cle-
aning of the rebox-combustion chamber must be performed (how often it needs to be done depends
on the variety and humidity of the wood used). Use a poker, scrapers, a brush, chimney vacuums and
ash separators for cleaning the hearth components.
GLASS CLEANING
The glass gets heated up to high temperatures, so clean it only when the hearth has cooled down.
Clean it using approved agents designed for this purpose only (do not use them to clean the rebox
parts). Do not use any abrasive agents for this purpose, asthis may cause its surface to be scratched.
DOOR/SEALING
The friction surfaces of the door hinges and closing device must be treated with graphite grease from
time to time. Before each heating season the whole stove must be inspected and cleaned. Give special
care to checking the sealing for its integrity, and replace it, if necessary.
ASH REMOVAL
Ash should be removed prior to each time you light the stove. To remove the ash, just empty the ash
container located below the re grate. Regular hearth-ash removal prevents the ash from spilling out.
Do not allow ash to spill over the barrier. Remove the ash from the stove when it is cold.
THE RANGE OF MODELS WITH TILES
Tiles – due to their production process, each individual production batch of the tiles has its unique
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kratki Orbit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kratki Orbit in the language / languages: English, German, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info