813936
11
Zoom out
Zoom in
Previous page
1/120
Next page
11
is supplied together with the defective equipment.
The warranty card is valid if:
- it has been properly completed and shows the purchase date, seal and signature;
- the purchase date shown in the warranty card is the same as that shown on the receipt or a copy of
the invoice.
Automatic Air Supply System (ASDP) – System
The bimetal based, self-regulating thermostat auto-
matically controls the supply of air to the hearth, and consequently controls the combustion tempera-
ture inside the freestanding stove.
Before lighting the stove set the opening angle of the thermostat so as to ensure free air ow to the
hearth and open the air inlets in the door and on the stove front..
It is recommended to open the thermostat initially (through experimentation) at 60%; then you will
obtain an optimal combustion temperature for a 3,5 - 4kg large batch of wood. Once the batch is lit
close the air inlets in the door and on the stove front. As the temperature in the replace is growing, the
thermostat starts to perform its function: while closing gradually, it reduces the amount of air in the
combustion chamber. When the optimal temperature of 300°C is reached, air supply is largely reduced,
resulting in the stoves temperature falling down until the minimum temperature necessary to mainta-
in the re is achieved. When the temperature drops below 250°C, air supply starts to be automatically
opened and combustions becomes more intense once again. To obtain a higher combustion tempera-
ture, you should set a larger opening angle of the thermostat before lighting the stove.
When the thermostat is in place, you can reduce the amount of wood needed to burn by 30% as com-
pared with the stove without an automatic combustion control system. In addition to wood savings,
this solution improves the comfort of the stove’s use; there is no need to keep checking and adjusting
air supply in the door and on the stove front to maintain proper combustion: the thermostat will do
this for you.
SPARE PARTS
If after many years some parts have to be replaced, please contact the vendor or any representative
of our company. When ordering spare parts, please name the details from the rating plate shown on
the reverse side of the warranty card, which should be retained even after the expiry of the warranty
period.
Having these details and our factory documentation, the vendor will be able to supply all spare parts
within a short time and proceed with repairs as part of their responsibilities. NOTE: Cracks that may
occur in vermiculite boards are natural for this type of material and do not aect its utility values.
NOTE: Do not use any air exhaust equipment in the room where the stove is installed (as required by
Polish laws).
MANUFACTURER
KRATKI.PL declines all liability for damage caused by the user’s modications of the unit and the rema-
ining piping system. To continually improve the quality of its products, KRATKI.PL reserves the right to
alter its equipment without prior notice.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kratki K7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kratki K7 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info