813934

Kratki K5 Manual

8
Zoom out
Zoom in
Previous page
1/120
Next page
8
First Lighting NOTE!
- during the rst lightings the unit should work in slow mode to allow normal expansion of its
parts
- knobs and other handles are warm when the stove is operating
Acrid smoke and burning smell issued from the room heater during the rst lightings should not
be of concern – this phenomenon is caused by the burning of the paint on various parts of the
unit (paint polymerisation).
All stickers and accessories should be removed from the ashpan and hearth before the rst lighting.
The minimum temperature should be maintained and the door should be set slightly ajar (approx. 1-
2cm) when the stove is lit for the rst time so that the packing material could combine with the varnish.
All the materials have to slowly adapt to high temperatures. During the rst several lightings the stove
produces an unpleasant smell caused by paint burning. So long as the smell is present, the room where
the stove is installed should always be ventilated.
Important: Before lighting a big re, you should try a small one for two or three times. This will help
the stove structure to settle properly and the paint to become hardened. The hearth should not be
entirely lled up with wood; the fuel amount is optimal when it lls up the combustion chamber up to
approx. one-third of its capacity. Before stoking up the re wait until the ames faint; do not put wood
on the glowing embers when they are too hot.
Fuel: Considering how our equipment is designed, the recommended fuel that can be used is wood
such as oak, hornbeam, ash and beech. Brown coal briquette can also be used. The best fuel is se-
asoned wood (seasoned in a well-ventilated and dry place for at least one year) in cut and split logs.
Coniferous wood is not recommended as the ignition is too intense. Fresh or poorly dried wood is not
a good fuel because of its limited energetic properties. Burning such wood can result in increased
emission of creosote that collects in the ue pipes. Minerals (e.g. coal), tropical wood (e.g. mahogany),
chemicals or liquid substances such as oil, alcohol, petrol, naphthalene, laminated or impregnated
boards, compressed pieces of wood bound with glue or rubbish cannot be burnt in such equipment.
If another fuel is permitted, such information will be included in the rating plate.
secondary air control
exhaust outlet (up, down)
primary air control
door
window/glass
handle
General Diagram of the Freestanding Stove
The minimum distance of the furnace from non-combustible materials is 40 cm.
Minimum distance from combustible materials furnace is 60 cm (sides and back) from the door
it is 150 cm.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kratki K5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kratki K5 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info