716917
12
Zoom out
Zoom in
Previous page
1/19
Next page
22 23
14. Switch on high pressure cleaner with
opened safety trigger gun. Bleeding
of the high pressure cleaner: Pull and
release trigger of safety trigger gun
several times. Start cleaning task.
13. Connect to circuit (see technical data).
Do not touch the mains plug or any live parts with wet or moist hands.
15. When using the turbokiller lance
(optional) make sure that lance points
downward when starting.
Putting into operation
16. Adjust operating pressureinfinitely
using the rotary handle. The maximum
pressure is factory-set.
Putting into operation
It is imperative that safety instructions be observed during
use of the high pressure cleaner.
WS
10. If using a water inlet filter check it
for cleanliness prior to each startup.
Manually unscrew filter bowl, remove
sieve and thoroughly rinse and clean
with the rest of the parts in clear
water. If the sieve is dirty, water can
not get through and pressure will
not build up.
11. Connect water hose to water inlet (mi-
nimum requirements;
5 m hose length,
cross-section ¾", 10 bar). The high pressure
cleaner may be connected to a water
mains (1-10 bar pre-pressure) with eit-
her cold or hot water (up to 60 °C).
The WS/WS-RP/WSC-RP-series provides
the opportunity of sucking in water out
of a container (see direct suction).
Check the water inlet sieve for damage. Do not operate the
high pressure cleaner without or with a damaged filter.
Be careful when using hot water!
When running your high pressure cleaner with hot water of 60 °C raised
temperatures occur. Do not touch the metal parts of the high pressure
cleaner without safety gloves!
12. The oil level must reach to the upper
edge of the mark.
WS-RP/
WSC-RP
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle WS-RP 1400 TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle WS-RP 1400 TS in the language / languages: English as an attachment in your email.

The manual is 6,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle WS-RP 1400 TS

Kranzle WS-RP 1400 TS Additional guide - English, German - 17 pages

Kranzle WS-RP 1400 TS User Manual - German - 19 pages

Kranzle WS-RP 1400 TS User Manual - Dutch - 19 pages

Kranzle WS-RP 1400 TS User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info