716913
10
Zoom out
Zoom in
Previous page
1/19
Next page
18 19
Wall mounting shall be performed by a specialist.
For mounting, please do not just observe the carrying capacity of the
wall but also the weight of the high-pressure cleaner (please refer to
technical data).
Putting into operation
Safety shutdown
If the high-pressure cleaner is accidentally not turned o after use or the safety
trigger gun is not used for 20 minutes, the high-pressure cleaner automatically
changes into safety state by deactivation. By operating the main switch once
more, the high-pressure cleaner is activated again.
High pressure hose and spray device
The high-pressure hose and spray device which are part of the WS/WS-RP/
WSC-RP-series equipment, are made of high-quality material and engineered
to conform with the operating conditions of the high-pressure cleaner and
are duly labelled.
If replacement parts are required, only such parts that are authorized
by the manufacturer may be used. The warranty is automatically void
if spare parts of third-party providers are used! The high pressure hose
and spray device must be connected in a pressure-tight manner
(without leakage).
The high pressure hose may not be driven over, pulled excessively, or
twisted. The high pressure hose may under no circumstances be pulled
over sharp edges. Defective high pressure hoses must not be repaired
(acc. to DIN 20022) but have to be replaced by new hoses approved by
the manufacturer.
Prior to putting the high pressure cleaner into operation make sure
that all safety instructions be observed.
The WS/WS-RP/WSC-RP-series may be applied both as a standing device as well
as mounted on the wall. When setting down the high-pressure cleaner please
provide for a safe stand.
Wall mounting
Attach the holder for the lances with
a screwdriver and the enclosed screws.
The high-pressure cleaner may be carried
by two persons. Please note the weight of
the high-pressure cleaner (refer to technical
data).
When setting down the high-pressure
cleaner please provide for a safe stand.
Please find the eyelets for wall mounting
on the back of the device.
Hole spacing distance (bore): 485 mm
Functional details
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle WS 1000 TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle WS 1000 TS in the language / languages: English as an attachment in your email.

The manual is 6,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle WS 1000 TS

Kranzle WS 1000 TS Additional guide - English, German - 17 pages

Kranzle WS 1000 TS User Manual - German - 19 pages

Kranzle WS 1000 TS User Manual - Dutch - 19 pages

Kranzle WS 1000 TS User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info