716907
18
Zoom out
Zoom in
Previous page
1/29
Next page
34 35
Applying additives
Suction of additives
Due to the water tank fitted to the therm-RP-series it is now possible to directly
suck the detergent into the high-pressure pump thus reducing output loss
and increasing the efficiency considerably.
1. Place chemicals filter into container
with additives.
2. Dosing of detergent is done by turning
the detergent valve.
3. By closing the detergent valve the
supply of detergent is stopped.
Putting into operation
3.
Set desired temperature at the
thermostat. (Min. temperature 40 °C).
On the subject of thermostat settings,
see chapter "Functional details" in these
operating manual.
During high-pressure operation (above 30 bar) the temperature
may not exceed 90 °C.
During steam operation (90 - 150 °C) the pressure may not exceed
30 bar! To reach the steam level (above 90 °C water temperature)
adjust the pressure below 30 bar and choose by means of the
thermostat the desired temperature of up to max. 150 °C.
Usage as a hot water high-pressure cleaner
1. Detergent valve must be closed.
4. Switch on heater switch. The water is
heated up and constantly kept at the
set temperature.
Start with cleaning process.
2. Switch on high-pressure cleaner with
opened trigger gun (trigger pulled).
Bleeding of the high-pressure cleaner:
Pull and release trigger of trigger gun
with safety catch several times.
Only open the dosing valve, if the detergent sieve is placed in a liquid!
Sucked air leads to destruction of the pump seals of the high-pressure
cleaner (No warranty)!
The additive must reveal a neutral pH value of 7-9. This machine has been
designed for use of cleaning agents supplied or specifically recommended
by the manufacturer. The use of other cleaning agents or chemicals may
impair the safety of the machine. Observe and comply with relevant
regulations, e.g. directives governing protective equipment, waste-water
regulations, etc.
Attention solvents!
Never suck in liquids containing solvents like varnish solvents, petrol, oil
or similar liquids! Seals inside the high-pressure cleaner are no resistant
against solvents! The spray mist of solvents is highly inflammable,
explosive and poisonous.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle therm-RP 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle therm-RP 1000 in the language / languages: English as an attachment in your email.

The manual is 6,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle therm-RP 1000

Kranzle therm-RP 1000 Additional guide - English, German - 17 pages

Kranzle therm-RP 1000 User Manual - German - 29 pages

Kranzle therm-RP 1000 User Manual - Dutch - 29 pages

Kranzle therm-RP 1000 User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info