716911
12
Zoom out
Zoom in
Previous page
1/56
Next page
Commissioning
12
Electrical connection
Make sure that the master switch is switched off (position „0“).
Plug in the power cable of your high-pressure cleaner.
The voltage given on the specication plate must match the mains voltage. You can
nd the specication plate on the front right-hand side of the appliance.
The machine is supplied with a power cable and plug.
The plug must be connected to a properly installed electrical socket
with earthing and have a 30 mA FI residual current circuit breaker.
The socket must have a neutral 16A fuse on the mains side.
If an extension cable is used, it must have an earth line that is properly
connected to the plug connections. The lines in the extension cable must have a
cross section of at least 1.5 mm². The plug connections must be of spray protected
design and may not lie on a wet surface. (If the extension cable is longer than 10 m
the minimum cross section is 2.5 mm²)
Important!
Extension cables that are too long cause a drop in the voltage and
thus interruptions in operation. If you are using a cable drum, the
cable must always be fully unwound.
Commissioning
Secure the machine by applying the brake (see page 8)
and check the oil level of the high pressure
pump.
Do not start the machine if there is no oil on
the dipstick. Fill oil if necessary. See page 18.
Use EL heating oil (DIN 51603) or Diesel fuel only.
Unsuitable fuels, such as petrol, may not be used (danger of
explosion).
Fill the fuel tank with light heating oil prior to use.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle Therm CA 15-120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle Therm CA 15-120 in the language / languages: English as an attachment in your email.

The manual is 10,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle Therm CA 15-120

Kranzle Therm CA 15-120 Additional guide - English, German - 32 pages

Kranzle Therm CA 15-120 User Manual - German - 31 pages

Kranzle Therm CA 15-120 User Manual - Dutch - 56 pages

Kranzle Therm CA 15-120 User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info