508534
18
Zoom out
Zoom in
Previous page
1/31
Next page
34 35
Putting into operation Putting into operation
12. For getting access to the interior fitting
of the high-pressure cleaner, loosen
screws at the cover. Remove cap
carefully.
Close cap properly prior to starting
the washing procedure.
13. Each time check oil level at the oil dip-
stick prior to putting the high-pressure
cleaner into operation. Oil level must
reach until the upper edge of marking
"OK“. See chapter „Care and Main-
tenance“ in these operating manual.
14. Connect to circuit (see technical data).
Do not touch the mains plug or any live parts with wet or moist hands.
15. When using the turbokiller (available
optionally), ensure that the lance is
pointing down for start-up.
Prior to putting the high-pressure cleaner into operation make sure
that all safety instructions be observed.
Usage as a cold water high-pressure cleaner
1. Detergent valve must be closed.
2. Switch on high-pressure cleaner with
opened trigger gun (trigger pulled).
Bleeding of the high-pressure cleaner:
Pull and release trigger of trigger gun
with safety catch several times.
Start with cleaning process.
3. When starting the cleaning process
do not aim the water jet towards the
object you want to clean for at least
30 seconds. Maybe the water inside
the combustion chamber has changed
colour due to the rest time.
16. Adjust operating pressureinfinitely
using the rotary handle. The maximum
pressure is factory-set.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle Therm 895-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle Therm 895-1 in the language / languages: English as an attachment in your email.

The manual is 6,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle Therm 895-1

Kranzle Therm 895-1 User Manual - German - 44 pages

Kranzle Therm 895-1 User Manual - Dutch - 44 pages

Kranzle Therm 895-1 User Manual - French - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info