508533
5
Zoom out
Zoom in
Previous page
1/31
Next page
8 9
Replacement of the power supply cables is only permitted by use of an original
power supply cable of the manufacturer and must be performed by a qualified
electrician.
Safety devices serve to protect the user and must never be de-activated
or their function bypassed.
The high-pressure cleaner is to be properly used. The user is required to adhere
to local requirements and to watch out for the persons in the danger zone!
If used in elevated positions where there is a risk of the unit falling to the ground,
it must be secured against rolling away or tipping over.
The high-pressure cleaner is not designed for use by persons with restricted physical,
sensory or mental abilities (including children)!
Some parts inside the machine, all metal parts of trigger gun with safety catch
and lance are hot during hot water. Keep all hoods and protective covers closed
during operation and never touch any metal parts of gun or lance without
wearing appropriate protective gloves.
Use EL heating oil (DIN 51 603) or diesel fuel (DIN EN 590) only.
Using other kinds of fuel may cause considerable risks (explosions).
User operating the high-pressure cleaner should wear the necessary protective
clothing, i.e. waterproof clothing, rubber boots, safety goggles, ear protection
headwear etc. It is prohibited to use the high-pressure cleaner in close vicinity
to people lacking suitable protective clothing.
If noise exceeds the maximum allowed levels, users and others in the vicinity
must wear suitable ear protection.
Use of high-pressure cleaners may result in aerosols being generated. An aerosol
is a mixture of floating solid or liquid particles in a gas. Inhaling aerosol parti-
cles may cause damage to health. Employers are under obligation to carry out
a hazards assessment in order to determine the necessary protective measures
to prevent inhalation of aerosols as governed by the surface due to be cleaned
in each case. Respiratory masks, Class FFP 2 or higher, are suitable for protection
against aqueous aerosols.
Whenever the high-pressure cleaner is left unattended, the mains disconnect
switch must always be switched off.
Do not spray against matter containing asbestos or other hazardous substances!
Never spray flammable liquids or liquids containing solvents such as paint thinners,
petrol, oil or similar liquids! Explosion hazard due to spraying such materials!
Due to the high-pressure jet, damage may occur on the objects to be cleaned,
e.g. car tires; therefore, a minimum distance of 30 cm is to be kept!
Prior to putting the high-pressure cleaners into operation, check its components
(High-pressure hose, power supply cables, safety trigger gun) for any damage.
Replace defect or damaged components!
Only use high-pressure hoses, couplings and fittings recommended by Kränzle.
Only these accessories ensure safety of the equipment.
If use is made of an extension cable, this must be suitable for outdoor use.
In addition care needs to be taken to ensure that the cable is kept dry and
that it is situated above the ground. We recommend the use of a cable drum
capable of keeping the socket at least 60 mm above the ground.
When using high-pressure water for cleaning,
make sure that there is a clearly noticeable
recoil effect on the lance. Therefore ensure
a firm footing (see technical data).
Safety notes - This is prohibited!Safety notes
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle Therm 875-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle Therm 875-1 in the language / languages: English as an attachment in your email.

The manual is 6,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle Therm 875-1

Kranzle Therm 875-1 User Manual - German - 44 pages

Kranzle Therm 875-1 User Manual - Dutch - 44 pages

Kranzle Therm 875-1 User Manual - French - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info