508542
7
Zoom out
Zoom in
Previous page
1/31
Next page
12
Putting into operation
2.
Always secure machine by activating
the parking brake before starting work!
3
. Check water inlet filter for
cleanliness prior to putting the
machine into operation! Unscrew
glass body of the inlet filter and check if
metal sieve is soiled.
4.
Always check oil level prior to
operation!
Open the right half of the protecting
hood.
1.
Steering the machine: To change
direction tilt machine by pressing a foot
against the footrest and pull the handle
at the same time. Then turn machine
into desired direction.
Do not start the machine if the oil level
is not between the two markings on the
oil-level glass. Refill with oil if necessary.
See page 23
5.
Connect machine to water mains
(2 - 8 bar pre-pressure).
Inside diameter of hose minimum
1/2 ". The water storage tank is filled
with water. The float valve shuts the
water intake as soon as the tank is
full.
13
6.
Connect to power circuit
. Make sure
that the main switch is on the "OFF"
position.
The socket must be protected by means
of a time-delay fuse on the mains side
(for details as to ampere values see
technical data on pages 6/7).
8.
Release fixation of hose drum.
7.
For appliances without hose drum:
Screw high-pressure hose to the
high-pressure outlet pressure-tightly.
9.
Unwind high-pressure hose from the
hose drum without any kinks or
nooses.
10.
Attach high-pressure hose to the gun
and screw together pressure-tightly.
Take care that all screw connections are pressure-tight. A leakage of
gun, high-pressure hose or hose drum has to be repaired at once.
Leakages lead to an increased wear and to a possible malfunction of
the delayed motor cut-out.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle Therm 872 E-M 48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle Therm 872 E-M 48 in the language / languages: English as an attachment in your email.

The manual is 6,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle Therm 872 E-M 48

Kranzle Therm 872 E-M 48 User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info