716933
22
Zoom out
Zoom in
Previous page
1/60
Next page
22
Decalcifying the continuous-flow heater:
Calcified machines use an unnecessary amount of energy because the water can only
be heated slowly and the excess pressure valve feeds a part of the water back into the
pump circuit.
Calcified machines can be recognised by increased pipeline resistance.
Check pipeline resistance by disconnecting the high pressure lance from the gun and
switching the machine on. A full jet of water emerges from the gun. The machine must be
decalcified if the pressure shown on the manometer is greater than 25 bar.
Proceed as follows to decalcify the machine:
1.
Unscrew the high pressure hose from the machine and decalcify it separately.
2.
Put the detergent suction hose into a container of decalcifying solution.
3.
Set the detergent valve to the maximum concentration.
4.
Switch on the machine.
5.
Hold the gun in a separate container and press the trigger.
6.
Wait for about a minute until the decalcifier comes out of the gun
(recognisable by its whitish colour)
7.
Switch off the machine and allow the solution to act for about 15-20 minutes.
8.
Switch the machine back on and rinse with clear water for about 2 minutes.
9.
Now check whether pipeline resistance is back to an acceptable level.
Repeat the decalcifying process if the pressure without the high pressure lance is
still above 25 bars.
Decalcifiers are caustic!
Observe the instructions for usage and accident prevention. Wear
protective clothing to prevent the decalcifying agent from contacting
your skin, eyes and clothing (e.g. gloves, safety mask etc.)
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle therm 871 E-ST 48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle therm 871 E-ST 48 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle therm 871 E-ST 48

Kranzle therm 871 E-ST 48 User Manual - German - 60 pages

Kranzle therm 871 E-ST 48 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info