716899
12
Zoom out
Zoom in
Previous page
1/29
Next page
22 23
Functional details
Please note: Lack of water
Lack of water occurs more often than you
probably believe. The more powerful a high-
pressure cleaner is the greater is the danger
that a lack of water occurs. If there is only
an insucient amount of water available,
cavitation (water-gas mixture) arises inside
the high-pressure pump, which is normally
noticed too late or even not at all. The high-
pressure pump will be destroyed. Please
check the available quantity of water by fil-
ling a bucket with liter scale for one minute.
Required minimum quantity of water (see technical data).
If the metered quantity of water is too small, you have to use a dif-
ferent water connection, guaranteeing the necessary output. Lack of
water leads to an accelerated wear of the joints (guarantee void).
Water supply
Please pay attention to the regulations of your waterworks com-
pany! In accordance with DIN EN 61770, the high-pressure cleaner
may not be directly connected to the public drinking water supply
lines. A brief connection however is permissible according to DVGW
(German Association for Gas and Water Aairs) if a non-return val-
ve with tube ventilator (Kränzle order no. 41.016 4) is built into the
water supply. Once the water has passed through the non-return
valve it is no longer considered as drinking water. Also indirect
connection to the public drinking water supply lines is permissible
by way of free emission in accordance with EN 61 770; e.g. by using
a reservoir with a float valve. Direct connection to a non-drinking
water supply line is permissible.
Insucient quantity of electricity
Functional details
If there are too many collectors in your
proximity connected to the network at the
same time, the available voltage and the
current intensity may decline. Consequently
the motor of the high-pressure cleaner does
not start or even blows. The power supply
may also be insucient if the power supply
cable is too long or too thin. If extension
cables are too long, this may lead to a volta-
ge drop causing malfunctions or start-up
diculties.
Check the line fusing and have the voltage and the available current in-
tensity checked by an expert in case of uncertainty (see technical data).
Electrical connection
The high-pressure cleaner is supplied with a 5 meters long power supply cable.
The mains plug must be fitted to a standard grounded socket with a 30 mA
residual current operated device. The socket must be protected with a 16 A fuse
on the mains side. When using an extension cable, this must have an earthed
lead which is properly connected to the socket. The conductors in the extension
cable must have a minimum cross section of 1.5 m. Plug connections must
be of a spray-proof design, and may not be located on a wet floor. For extension
cables of more than 10 m in length, the minimum cross-section must be 2.5 mm²!
When using a cable drum, the power supply cable always must be unwound all
the way.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle Therm 715 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle Therm 715 in the language / languages: English as an attachment in your email.

The manual is 8,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle Therm 715

Kranzle Therm 715 Additional guide - English, German - 23 pages

Kranzle Therm 715 User Manual - German - 29 pages

Kranzle Therm 715 User Manual - Dutch - 29 pages

Kranzle Therm 715 User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info