716900
15
Zoom out
Zoom in
Previous page
1/29
Next page
28 29
9. After insertion of the lance, release
retaining sleeve and make sure that the
lance is in a secure position.
Grease quick release nipple regularly
using acid-free grease.
8. First pull back the retaining sleeve
of the safety trigger gun, then
insert lance into the plug coupling
sconnection of the safety trigger gun.
7. Tightly screw together high-pressure
hose and safety trigger gun.
6. Without hose drum:
For high-pressure cleaners without
hose drum the high-pressure hose in-
cluded in the scope of the delivery must
be screwed with the pump outlet in a
tight and pressure tight manner.
5. Unwind high-pressure hose straight
and without nooses. For high-pressure
cleaners with hose drum please release
fixing of hose drum at first and fully
uncoil it after that. (When extending
the high-pressure hose please consider
the maximum length of 20 m!)
10. If using a water inlet filter check it for
cleanliness prior to each startup.
Manually unscrew plug-in coupling.
Take out the water inlet filter using
needle nose pliers and thoroughly
rinse it with clear water and clean it
with the other parts.
11. Connect the water hose to water
inlet sieve. The high-pressure cleaner
may be connected to a water mains
(1-10 bar pre-pressure) with either cold
or hot water (up to 60 °C).
The therm 1017 series provides the
opportunity of sucking in water out of
a container (see direct suction).
Check the water inlet sieve for damage.
Do not operate the high-pressure cleaner using the damaged filter.
Be careful when using hot water!
When running your high-pressure cleaner with hot water of 60 °C raised
temperatures occur. Do not touch the metal parts of the high-pressure
cleaner without safety gloves!
12. For getting access to the interior fitting
of the high-pressure cleaner, loosen
screws at the cover. Remove cap
carefully.
Close cap properly prior to starting
the washing procedure.
In the case of high-pressure cleaner with hose drums,
the high-pressure hose must always be unwound completely.
Putting into operation
Putting into operation
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle Therm 1017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle Therm 1017 in the language / languages: English as an attachment in your email.

The manual is 8,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle Therm 1017

Kranzle Therm 1017 Additional guide - English, German - 23 pages

Kranzle Therm 1017 User Manual - German - 29 pages

Kranzle Therm 1017 User Manual - Dutch - 29 pages

Kranzle Therm 1017 User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info