382073
11
Zoom out
Zoom in
Previous page
1/21
Next page
20 21
Safety shutdown
If the high pressure cleaner is accidentally not turned off after use or the safety
trigger gun is not used for 20 minutes, the high pressure cleaner automatically
changes into safety state by deactivation. By operating the main switch once
more, the high pressure cleaner is activated again.
High pressure hose and spray device
The high pressure hose and spray device which are part of large quadro series
equipment, are made of high quality material and engineered to conform with
the operating conditions of the high pressure cleaner and are duly labeled.
If replacement parts are required, only such parts that are authorized
by the manufacturer may be used. The warranty is automatically void if
spare parts of third-party providers are used! The high pressure hose and
spray device must be connected in a pressure-tight manner
(without leakage).
The high pressure hose may not be driven over, pulled excessively, or
twisted. The high pressure hose may under no circumstances be pulled
over sharp edges. Defective high pressure hoses must not be repaired
(acc. to DIN 20022) but have to be replaced by new hoses approved by
the manufacturer.
Prior to putting the high pressure cleaner into operation make sure
that all safety instructions be observed.
Neither set up or operate the large quadro series in rooms where there
is a risk of fire or explosion nor put it into puddles. Do not use the high
pressure cleaner under water. If, none the less, the high pressure
cleaner is operated in a hazardous area, the applicable safety
regulations are to be observed.
3. The large quadro series is a movable
high pressure cleaner with sturdy trol-
leys ideally suited for difficult terrain.
For steering the high pressure cleaner
put the foot against the tipping
support and then pull the device
towards you.
2. For moving the high pressure cleaner
to the place of use, please release
locking break.
1. For high pressure cleaners with hose
drum the enclosed hand crank mus be
applied prior to first operation.
Plug the hand crank onto the hexagon
and attach it with the enclosed screw
and washer.
4. For transport purposes the handle
can be taken off easily. First detach
the high pressure hose from the hose
drum. After that, unscrew the fixing
screws and detach handle and hose
drum
Functional details Putting into operation
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle quadro 1000 tst at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle quadro 1000 tst in the language / languages: English as an attachment in your email.

The manual is 4,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle quadro 1000 tst

Kranzle quadro 1000 tst User Manual - German - 44 pages

Kranzle quadro 1000 tst User Manual - Dutch - 44 pages

Kranzle quadro 1000 tst User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info