716883
12
Zoom out
Zoom in
Previous page
1/19
Next page
22 23
8. Check water inlet filter for cleanliness
prior to putting the high pressure
cleaner into operation.
Manually unscrew plug-in coupling.
Take out the water inlet filter using
needle nose pliers and thoroughly
rinse it with clear water and clean
it with the other parts. If the sieve
is dirty, water can not get through
and pressure will not build up.
9. Connect water hose to water inlet
(minimum requirements; 5 m hose
length, cross-section ¾", 10 bar).
The high pressure cleaner may
be
connected to a water mains (1-10 bar
pre-pressure) with either cold or hot
water (up to 60 °C).
Check the water inlet sieve for damage. Do not operate the
high pressure cleaner without or with a damaged filter.
Be careful when using hot water!
When running your high pressure cleaner with hot water of 60 °C raised
temperatures occur. Do not touch the metal parts of the high pressure
cleaner without safety gloves!
12. Switch on high pressure cleaner with
opened safety trigger gun. Bleeding
of the high pressure cleaner: Pull and
release trigger of safety trigger gun
several times. Start cleaning task.
11. Connect to circuit (see technical data).
13. When using the dirtkiller lance make
sure that lance points downward when
starting.
15. The K 1152-series units are equipped
with a support for the safety trigger
gun with lance during breaks.
Operate high pressure cleaner in
horizontal position.
Putting into operation Putting into operation
14. Adjust operating pressureinfinitely
using the rotary handle. The maximum
pressure is factory-set.
10. Each time check oil level at the oil
dipstick prior to putting the high
pressure cleaner into operation.
(Take care that cleaner is in horizontal
position!) Oil level must reach until the
upper edge of marking "OK“.
Do not touch the mains plug or any live parts with wet or moist hands.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle K 1152 TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle K 1152 TS in the language / languages: English as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle K 1152 TS

Kranzle K 1152 TS Additional guide - English, German - 13 pages

Kranzle K 1152 TS User Manual - German - 19 pages

Kranzle K 1152 TS User Manual - Dutch - 19 pages

Kranzle K 1152 TS User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info