716670
11
Zoom out
Zoom in
Previous page
1/18
Next page
20 21
9. Check water inlet filter for cleanliness
prior to putting the high pressure
cleaner into operation.
When inside filter is contaminated,
remove filter and follow step 9.1.
If the sieve is dirty, water cannot get
through and pressure will not build up.
10.
Connect the water hose to water inlet
sieve (minimum requirements; 5 m
hose length, cross-section ¾", 10 bar).
The high pressure cleaner may be
connected to a water mains (1-10 bar
pre-pressure) with either cold or hot
water (up to 60 °C).
Check the water inlet sieve for damage. Do not operate the
high pressure cleaner without or with a damaged filter.
9.1 If contaminated, remove the filter and
thoroughly rinse it with clear water
and clean it with the other parts.
Be careful when using hot water!
When running your high pressure cleaner with hot water of 60 °C raised
temperatures occur. Do not touch the metal parts of the high pressure
cleaner without safety gloves!
12. Switch on high pressure cleaner with
opened safety trigger gun. Bleeding
of the high pressure cleaner: Pull and
release trigger of safety trigger gun
several times. Start cleaning task.
It is imperative that safety instructions be observed during
use of the high pressure cleaner.
11. Connect to circuit (see technical data).
13. When using the filth killer lance make
sure that lance points downward when
starting.
14. The K 1050 TS/TST units are equipped
with a support for the safety trigger
gun with lance during breaks.
Operate high pressure cleaner in
horizontal position.
Putting into operation Putting into operation
Do not touch the mains plug or any live parts with wet or moist hands.
When using high pressure hose extensions take care that the max. length
of 20 m is not exceeded!
Accessories may only be connected to a Kränzle-approved trigger gun
with safety catch.
11


Need help? Post your question in this forum.

Forumrules
1

Forum

kranzle-k-1050-tst

Reset search

  • Mon K 1050 T c'est arrêté en cours de fonctionnement, il présente une fuite d'huile importante et le moteur est bloqué. Merci de bien vouloir me dire ce que vous en pensez. Submitted on 17-4-2023 at 11:57

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle K 1050 TST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle K 1050 TST in the language / languages: English as an attachment in your email.

The manual is 7,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle K 1050 TST

Kranzle K 1050 TST User Manual - German - 17 pages

Kranzle K 1050 TST User Manual - Dutch - 18 pages

Kranzle K 1050 TST User Manual - Dutch - 26 pages

Kranzle K 1050 TST User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info