716903
16
Zoom out
Zoom in
Previous page
1/29
Next page
30 31
7. After insertion of the lance, release
retaining sleeve and make sure that
the lance is in a secure position.
Grease quick release nipple regularly
using acid-free grease.
6. First pull back the retaining sleeve
of the safety trigger gun, then
insert lance into the plug coupling
sconnection of the safety trigger gun.
4. For high-pressure cleaners with hose
drum, please loosen the fixation and
then completely unwind the high-pres-
sure hose. For high-pressure cleaners
without hose drum the high-pressure
hose included in the scope of the
delivery must be screwed with the
pump outlet in a tight and pressure
tight manner. Unwind high-pressure
hose straight and without nooses.
The high-pressure hose may leave
signs of abrasion on some floors.
Alternatively, please also find
non-marking high-pressure hoses
in our range.
5. Tightly screw together high-pressure
hose and safety trigger gun.
8.
Check water inlet filter for cleanliness
prior to putting the high-pressure
cleaner into operation.
Unscrew the filter cup manually, take
out the water inlet screen, flush thor-
oughly and clean with the remaining
parts under clear water. If the screen
is dirty, no water can run through and
no pressure can build up.
Check the water inlet sieve for damage. Do not operate the
high-pressure cleaner without or with a damaged filter.
9. Connect water hose to water inlet
(minimum requirements; 5 m hose length,
cross-section ¾", 10 bar). The high-
pressure cleaner may be connected to
a water mains (1-10 bar pre-pressure)
with either cold or hot water (up to
60 °C). The e-therm-series provides
the opportunity of sucking in water
out of a container (see direct suction).
Be careful when using hot water!
When running your high-pressure cleaner with hot water of 60 °C raised
temperatures occur. Do not touch the metal parts of the high-pressure
cleaner without safety gloves!
Putting into operation Putting into operation
Prior to insertion, check plug coupling connection of lance for
cleanliness (sand, dirt ..) and use clear water to clean, if necessary.
Impurities may damage the sealing in the plug coupling.
When using high-pressure hose extensions take care that the max.
length of 20 m is not exceeded!
Accessories may only be connected to a Kränzle-approved trigger gun
with safety catch.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle e-therm 603 M 36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle e-therm 603 M 36 in the language / languages: English as an attachment in your email.

The manual is 6,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle e-therm 603 M 36

Kranzle e-therm 603 M 36 Additional guide - English, German - 25 pages

Kranzle e-therm 603 M 36 User Manual - German - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info