716902
20
Zoom out
Zoom in
Previous page
1/29
Next page
38 39
Small repairs - do it yourself Small repairs - do it yourself
The stainless steel pressure gauge shows
full pressure, but from the nozzle comes
only little water or no water at all.
(Inside the stainless steel pressure gauge is
no water but a filling with glycerin to damp
the vibration of the pointer.)
Proceeding:
Switch off the high-pressure cleaner. Pull
plug from the socket. Operate safety trigger
gun catch several times to decrease the
pressure.
First remove the trigger gun with safety
catch and the lance and flush the high-
pressure hose clear of potential residues.
Check water inlet filter for soiling.
If the problem still exists, take wire (paper
clip) and push through nozzle opening.
If this procedure is not successful,
the nozzle has to be replaced.
Problem
No water from nozzle although the high-pressure cleaner is running.
The stainless steel pressure gauge shows full pressure.
Cause
Most likely the nozzle is blocked.
Pull plug from socket prior to starting any repair work!
The stainless steel pressure gauge shows
low pressure despite fully turned up pres-
sure regulation. The water from the lance
comes in squirts. The high-pressure hose
vibrates.
(Inside the stainless steel pressure gauge is
no water but a filling with glycerin to damp
the vibration of the pointer.)
Proceeding:
Unscrew all 6 valves, one after the other
(hexagonal brass screws, 3 in a row,
vertically and horizontally)
Take out valve body and O-ring by means
of needle nose pliers. Check O-ring for
damage. In case of a damage the O-ring
has to be replaced.
Take a wire (paper clip) and clean valves
under running water.
Do not forget the O-ring during reassembly!
Problem
Irregular jet from nozzle.
The stainless steel pressure gauge shows low pressure.
Cause
Most likely the valves are soiled or sticky.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle e-therm 500 M 24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle e-therm 500 M 24 in the language / languages: English as an attachment in your email.

The manual is 6,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle e-therm 500 M 24

Kranzle e-therm 500 M 24 Additional guide - English, German - 25 pages

Kranzle e-therm 500 M 24 User Manual - German - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info