508511
3
Zoom out
Zoom in
Previous page
1/25
Next page
4 5
Description
Water and Cleaning / Pegemittel System
Water can be connected at mains pressure to the high pressure pump or it can
be sucked directly from a storage tank. The water is then forced under pressu-
re by the high pressure pump to the lance. The high pressure jet is formed by
the nozzle at the end of the lance.
Detergent and caring agents can be added through a high pressure injector
(special accessory). Up to max 20m HP hose length.
The rules concerning the environment, refuse and ground water
protection must be complied with!
(Information to be obtained from environmental dept, town
works, etc.)
Lance with trigger gun
The machine can only be operated when the safety trigger is squeezed. The
machine can only be operated when the safety trigger is squeezed.
When the lever is squeezed, the spray gun opens. The liquid is then pumped
to the nozzle. The spray pressure increases and quickly reaches the selected
operating pressure.
When the trigger is released, the trigger gun closes and any further spraying of
liquid from the lance is stopped.
The increase in pressure when the trigger gun is closed causes the unloader
valve-safety valve to open. The pump remains switched on and continues to
pump liquid through the pump at reduced pressure. When the trigger gun is
opened, the unloader valve - safety valve closes and the pump ressumes pres-
sure spraying from the lance
The trigger gun is a safety device. Repairs should only be performed by qua-
lied persons. Should replacement parts be required, use only
components authorized by the manufacturer.
Unloader valve - safety valve
The unloader valve - safety valve protects the machine from a
build p of excess pressure, and is designed not to permit an excess pressure
to be selected for operation. The limit nut on the handle is sealed with a spray
coating.
The operating pressure and spray rate can be steplessly adjusted by turning
the handle.
Replacements, repairs, new adjustments and sealing should only be performed
by qualied persons.
Description
For the motor follow the Honda operating manual
only.
Motor-safety: (see Honda operating manual)
Honda motors are safe and reliable if they are operated correctly. Read the opera-
ting manual carefully before using the motor and try to understand the contents of
the manual completely.
Not following this advice could lead to injuries or damage of the equipment.
To avoid a possible re hazard and to ensure the necessary ventilation
the motor has to be operated at a distance of at least 1 m from buil-
dings and objects. Inammable objects have to be kept away from the
surrounding area of the motor.
Children and pets have to be kept away from the motor, as there is
a danger of suffering burns from hot motor parts and to be injured by
equipment driven by the motor.
Get to know the motor and especially learn how to switch it off quickly.
Do not allow persons to operate the motor who are not familiar with it.
When running your high pressure cleaner with hot water of 70° C (with
B230 T 50°) raised temperatures occur.
Do not touch the machine without safety gloves.
CAUTION !
Never use liquid containing solvents such as paint thinners, petrol, oil or similar li-
quid matter. Pay attention to the instructions of the manufacturers of the
cleaning agents. The seals in the machine are not resistant to solvents.
The spray of solvents is inammable, explosive and poisonous.
Neither set up and operate the machine in rooms where there is a risk
of re or explosion nor put it into puddles. Do not use the machine
under water.
Do NOT !! tilt or turn round the high-pressure cleaner during transport
or operation for longer than 1 minute!
CAUTION !
Setting up: Location
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle B240T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle B240T in the language / languages: English as an attachment in your email.

The manual is 7,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle B240T

Kranzle B240T User Manual - German - 22 pages

Kranzle B240T User Manual - Dutch - 44 pages

Kranzle B240T User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info