508556
3
Zoom out
Zoom in
Previous page
1/29
Next page
Description
For the motor follow the Honda operating manual only.
Motor-safety:
(see Honda operating manual)
Honda motors are safe and reliable if they are operated correctly. Read the opera-
ting manual carefully before using the motor and try to understand the contents of
the manual completely.
Not following this advice could lead to injuries or damage of the equip-
ment.
To avoid a possible re hazard and to ensure the necessary ventilation
the motor has to be operated at a distance of at least 1 m from buil-
dings and objects. Inammable objects have to be kept away from the
surrounding area of the motor.
Children and pets have to be kept away from the motor, as there is
a danger of suffering burns from hot motor parts and to be injured by
equipment driven by the motor.
Get to know the motor and especially learn how to switch it off quickly.
Do not allow persons to operate the motor who are not familiar with it.
When running your high pressure cleaner with hot water of 70° C raised
temperatures occur.
Do not touch the machine without safety gloves.
CAUTION !
Never use liquid containing solvents such as paint thinners, petrol, oil
or similar liquid matter. Pay attention to the instructions of the manufac-
turers of the cleaning agents. The seals in the machine are not resistant
to solvents. The spray of solvents is inammable, explosive and poiso-
nous.
Neither set up and operate the machine in rooms where there is a risk
of re or explosion nor put it into puddles. Do not use the machine
under water.
CAUTION !
Setting up: Location
The machine can only be operated when the safety trigger is squeezed.
When the lever ist squeezed, the spray gun opens. The liquid is then pumped to
the nozzle. The spray pressure increases and quickly reaches the selected opera-
ting pressure.
When the trigger ist released, the trigger gun closes and any further spraying of
liquid from the lance ist stopped.
The increase in pressure when the trigger gun is closed causes the unloader
valve-safety valve to open. The pump remaines switched on and continues to
pump liquid through the pump at reducated pressure.
When the trigger gun ist opened, the unloader valve - safety valve closes and the
pump ressumes pressure spraying from the lance.
The trigger gun is a safety device. Repairs should only be performed
by qualied persons. Should replacement parts be required, use only
components authorized by the manufacturer.
Lance with trigger gun
The unloader valve - safety valve protects the machine from a build-up of excess
pressure, and is designed not to permit an excess pressure to be selected for
operating. The limit nut on the handle is sealed with a spray coating.
The operating pressure and spray rate can be steplessly adjusted by tuning the
handle.
Replacements, repairs, new adjustments and sealing should only be
performed by qualied persons.
Unloader valve - safety valve
Environmental, refuse disposal and water protection
regulations must be observed !
Water - and Cleang - Care System
Water can be connected at mains pressure to the high pressure pump or it can be
sucked directly from a storage tank.
The water is then forced under pressure by the high pressure pump to the lance.
The high pressure jet is formed by the nozzle at the end of the lance.
Cleaning and caring agents can be mixed with the water by a low pressure injec-
tor. (not with B10/200)
Description
4 5
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle B10-200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle B10-200 in the language / languages: English as an attachment in your email.

The manual is 6,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle B10-200

Kranzle B10-200 User Manual - German - 26 pages

Kranzle B10-200 User Manual - Dutch - 52 pages

Kranzle B10-200 User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info