56074
29
Zoom out
Zoom in
Previous page
1/35
Next page
27
The following should be taken into account when operating the Eurit 30 in conjunction with a
PBX.
For detailed information on the following, please refer to your PBX operating manual.
Programming the public access code
When the telephone is operated in conjunction with a PBX, the public access code may have to be
programmed to ensure, for instance, that the numbers on the caller list are dialled correctly.
Press the MENU key until menu item “Installation”
appears. Press the Foxkey under
until “Public access”
appears.
Press the Foxkey under “change”.
Enter the public access code (max. 4 digits).
(Press the Foxkey under “del” to delete the current public
access code).
Press the Foxkey under “ok” to store the public access
code.
If you have programmed the public access code you can omit it (but not the prefix)
when entering numbers in the name list and under auto-dial keys.
The public access code is not automatically dialled when you dial using the keypad.
Call transfer by replacing the handset
When operating a telephone in conjunction with a PBX you can transfer a call by replacing the
handset (=forward). This function is not supported by all PBXs. To program this function, proceed
as follows:
Press the MENU key until “Installation” appears. Press the
Foxkey under
until “ECT” appears.
Press the Foxkey under “change”.
Press the Foxkey under “on” and “ok” to activate this
function.
“ECT off” (ex-factory status) means that you disconnect the active call when replacing
the handset (the call on hold is signalled).
“ECT on” means that the call is transferred when the handset is replaced.
You can also transfer a call by pressing the preprogrammed auto-dial key (see section
on “Programming auto-dial keys”).
PBX connection
Installation
Installation
ECT: off
change
ECT: off
ok on
ok del
Public access:
change
Public access:
ETK30_6.PM6 19.03.97, 17:3427
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KPN vox 930 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KPN vox 930 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info