718360
11
Zoom out
Zoom in
Previous page
1/16
Next page
11
The toasting plates (5) have a protective coating. To remove the protective layers on
the heating elements, heat up the toasting plates (5) (without food) for a few minutes.
This could cause a slight build-up of smoke and odour. This doesn’t cause any
harm nor does it mean that your appliance does not work properly. Make sure that
the room is well ventilated!
After this process your sandwich maker is ready for operation.
Warning: Plastic bags are a danger to toddlers and babies, therefore keep them
away to avoid suffocation.
Operation
Tip: Prepare all ingredients in advance before switching on the appliance.
1. Connect the appliance to a properly installed wall socket.
2. The red indicator light (2) lights up and the heating process starts.
3. As soon as the necessary temperature is reached the red indicator light (2) goes
out. Your sandwich maker is now ready for operation.
4. Open the lid (1) of the appliance by pulling the fastener (7) at the handle (3)
upwards.
5. Place your prepared sandwich into the sandwich maker.
Tip: To guarantee a even browning process grease either the toasting plates with
some oil / butter or butter the outside of the resp. bread or toast slices.
6. Close the lid (1) carefully until the fastener (7) locks into place. You will hear a click
sound. Your sandwich is now being toasted.
7. After 3 - 4 minutes your sandwich will be ready. Open the appliance and check
whether your sandwich is toasted according to your liking.
8. To remove your sandwiches use a wooden or plastic spatula to avoid damage to
the non-stick coating of the plates.
9. If you wish to prepare more sandwiches follow steps 3 - 7.
10. After use, disconnect the appliance from the mains and let it completely cool
down.
To turn the appliance properly off the power plug must be disconnected from the
mains after each use.
During operation, an integrated thermostat switches the appliance on and off to
ensure a constant temperature. This is indicated by the red indicator light (2) cycling
on and off.
ENGLISH
Instruction Manual
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korona 47011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korona 47011 in the language / languages: English, German as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info