717959
14
Zoom out
Zoom in
Previous page
1/20
Next page
14
6. Lift the kettle off the base (7). The water is now ready for use.
You can stop the boiling process any time by pushing the On/Off switch (4) upwards.
Attention: The boiling process is not stopped by only removing the unit from the
power base. The unit must be switched off properly. Otherwise, once put back onto
the base the unit will resume the boiling process as the switch is still set to 1-position
(ON).
Water left over from a previous boiling cycle can be re-used in the next boiling cycle.
However, always make sure that the water level is not too low.
Always unplug the appliance after use.
Dry-boil cut-out
Your kettle is equipped with a boil-dry cut-out, which will switch off the kettle
automatically, should it accidentally be operated without water or by not observing
the minimum water level. In the event of such a safety cut-out unplug the appliance
immediately and let it cool down for approx. 10 minutes. Afterwards, your kettle is
ready for use again.
Cleaning and Care
Before cleaning, always switch off the appliance and disconnect it from the
mains. Let it completely cool down.
Never immerse the appliance in water. Danger! Electric Shock!
Clean the body of the appliance with a moistened soft cloth.
Do not use any aggressive cleaning agents and/or other hard objects to clean the
appliance.
Open the lid (2) and remove the filter. Clean it under running tap water, if necessary,
with a soft nylon brush. Dry it afterwards and reinsert the filter into the spout.
DESCALING
Descale your appliance in regular intervals (approx. every 3 – 6 months), depending
on the frequency of use and the local water quality.
Never use any sharp, pointed or metal objects to remove limescale built up in the
kettle.
To remove limescale, use a common gentle descaler, which is suitable for your
appliance.
After descaling, always boil 4-5 kettles of water, which you do not use and pour
away. Use fresh water with each boiling cycle. This procedure is necessary to
remove any descaler residues in the kettle.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korona 20400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korona 20400 in the language / languages: English, German as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info