668583
27
Zoom out
Zoom in
Previous page
1/93
Next page
27
FireWire
The computer does not detect the ZERO4
Is the FireWire cable connected correctly?
It is possible that the operating system of your com-
puter has become unstable. Power-off your computer
and the ZERO4, and then turn the power back on again.
An error occurs when you disconnect from the computer
Never disconnect the ZERO4 from the computer while
your host application is in use.
While connected, you are asked to install software or a device driver
Does the operating system version of your computer
support the ZERO4?
Driver-related problems
Can’t install the KORG FireWire Audio/MIDI driver successfully
Could another FireWire (IEEE1394) device be con-
nected?
Disconnect all FireWire devices other than the ZERO4 from your com-
puter when you perform the installation. If the ZERO4 is connected to
an external FireWire hard disk, connect the ZERO4 directly to the
FireWire connector (IEEE1394 connector, iLink connector, DV connec-
tor) on the computer itself.
Could other software programs or resident software
(such as anti-virus software) be running?
It may be impossible to perform the installation successfully if other
programs are running. Exit all other programs before you begin the in-
stallation.
Can’t record/play audio or MIDI. No sound is output.
Did you connect or disconnect the FireWire cable or
turn the ZERO4’s power on/off while the software was
running?
Exit all of your software; then turn the ZERO4’s power off and on once
again.
For some models of computer, starting up your computer with the
ZERO4 already connected may cause operation to be unstable. In this
case, start up your computer before you connect the ZERO4.
Did your computer enter the Standby (Suspend) or
Sleep mode?
After returning to normal operating mode, exit all software and
power-cycle the ZERO4. Then start up your software again.
Is the KORG FireWire Audio/MIDI driver installed cor-
rectly?
In order to play back audio/MIDI using the ZERO4, you must install
the KORG FireWire Audio/MIDI driver. For details on the installation,
refer to “Installing the KORG FireWire Audio/MIDI driver” ( p.23).
Are multiple software programs running?
Error messages may appear if multiple software programs are running
simultaneously. In this case, you should exit the software you’re not
using. In Windows, closing the window of a program does not neces-
sary exit the program; if the program is shown in the task bar, it is still
running. You must close any unneeded programs shown in the
taskbar.
Have you correctly specified the input/output devices
you want to use?
Depending on the application you’re using, you may need to make au-
dio/MIDI device settings. Refer to the owner’s manual of the applica-
tion you’re using, and specify the appropriate audio/MIDI devices.
Noise or clicks/pops are heard when you record or play back on your
computer
Have you connected more than one ZERO4 unit, other
audio interface, or other audio device to your com-
puter?
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg Zero 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg Zero 4 in the language / languages: English, German, French as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info