46242
164
Zoom out
Zoom in
Previous page
1/183
Next page
Reference Guide
151
Reference Guide
Global
Parameters
5
2A 2D Global MIDI Channel, Note Receive Filter, External Out
Select & MIDI Filter
These pages allow you to set the parameters related to MIDI transmission and reception.
2A Global MIDI Channel:
The Global MIDI Channel is used as follows: to receive MIDI data in
Program mode, to select Combinations in Combination mode (when MIDI Filter PRG is set to
ENA or NUM), to control effects, and to send System exclusive messages.
All MIDI data on the X5DR is transmitted on the Global MIDI Channel.
MIDI data for individual Timbres in a Combination and tracks in a song is received on the MIDI
Channels specied in Combination Edit mode (Timbres) and Multi mode (tracks), respectively.
In Combination mode, when a Program Change message is received on the Global MIDI Channel,
a Combination is selected. So, to play a Combination from an external MIDI device, set the Global
MIDI Channel and the Timbre MIDI Channels differently.
MIDI data on the Global MIDI channel is used to control the effects (ON/OFF and Dynamic
Modulation).
Note Receive Filter:
The lter is applied to the received note numbers. Normally, this should be
set to ALL. However, if you want to increase the number of available notes by using another
X5DR, X5 or tone generator simultaneously, feed data to both tone generators, and set one to
ODD and the other to EVEN.
LCD Parameter Range Description
2A
Global MIDI Channel
(CH)
116 Sets the Global MIDI Channel.
Note Receive Filter
(Note R)
EVEN
ODD
ALL
Responds to even notes only.
Responds to odd notes only.
Responds to all notes.
2B External Out Select
MIDI
PCIF
X5DR data is output via MIDI OUT
X5DR data is output via TO HOST
2C
Program Change
Filter (PRG)
DIS
ENA
PRG
NUM
Program Change operation disabled
Program Change messages select Combinations and
Programs
Program Change messages select only Programs (not
Combinations)
MIDI Bank Select messages are not sent or received; only
Program Change messages are received and sent.
After Touch Filter
(AFT)
DIS
ENA
After Touch receive disabled
After Touch receive enabled
2D
MIDI Controller Filter
(CTRL)
DIS
ENA
MIDI Controller receive disabled
MIDI Controllers receive
System Exclusive
Filter (EX)
DIS
ENA
System Exclusive operation disabled
System Exclusive data sent and received
02A MIDI GLOBALø
CH= 1 NoteR:ALL
2A
2B 2C
02B EXT OUT SELø
MIDI
02C MIDI FILTERø
PRG:ENA AFT:ENA
02D MIDI FILTERø
CTRL:ENA EX:DIS
2D
MIDI OUT MIDI IN
EVEN
X5DR, X5, 05R/W etc.
Play
MIDI THRU
ODD
X5DR, X5, 05R/W etc.
MIDI IN
164


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg X5DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg X5DR in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info