668615
108
Zoom out
Zoom in
Previous page
1/132
Next page
Arpeggiator settings
102
Other examples of creating a user
arpeggio pattern
Melody pattern
1. Set “Step (Step No.)” to 01, and press the [0]
button.
Set “Ptch (Pitch Offset)” to +00.
2. Set “Step (Step No.)” to 02, and press the [0]
button.
Set “Ptch (Pitch Offset)” to +10.
3. Set “Step (Step No.)” to 03, and press the [0]
button.
Set “Ptch (Pitch Offset)” to +00.
4. Set “Step (Step No.)” to 04, and press the [0]
button.
Set “Ptch (Pitch Offset)” to +00.
5. Set “Step (Step No.)” to 05, and press the [0]
button.
Set “Ptch (Pitch Offset)” to +12.
6. For “Step (Step No.)” 06, do not enter a tone.
7. Set “Step (Step No.)” to 07, and press the [0]
button.
Set “Ptch (Pitch Offset)” to +00.
8. Set “Step (Step No.)” to 08, and press the [0]
button.
Set “Ptch (Pitch Offset)” to –02.
Chordal pattern
1. Set “Step (Step No.)” to 01, and press the [0]
button.
Set “Gt (Gate)” to LGT.
2. For “Step (Step No.)” 02, do not enter a tone.
3. Set “Step (Step No.)” to 03, and press the [1],
[2], [3], [4] buttons.
4. Set “Step (Step No.)” to 04, and press the [1],
[2], [3], [4] buttons.
5. For “Step (Step No.)” 05, do not enter a tone.
6. Set “Step (Step No.)” to 06, and press the [1],
[2], [3], [4] buttons. Set “Gt (Gate)” to LGT.
7. For “Step (Step No.)” 07, do not enter a tone.
8. Set “Step (Step No.)” to 08, and press the [1],
[2], [3], [4] buttons.
Note: To simulate the timing nuances of a
strummed guitar chord, select “Flam.” In
Program mode, select an acoustic guitar
program, and choose the user arpeggio pattern
that you created here. In the Setup page of
PROG 7: Ed–Arp/Ctrls, Setup, set “Gate” to
Step.
Then return to the GLOBAL 5: Arp.Pattern,
Edit page. For odd-numbered steps, set “Flam”
to a positive (+) value. For even-numbered
steps, set “Flam” to a negative (–) value.
Drum pattern
You can use the arpeggiator to play a rhythm pat-
tern by using “Fixed Note” with a drum program.
1. Select a drum kit program.
For this example, select preset program A020:
Standard Kit 3.
2. Select the GLOBAL 5: Arp.Pattern, Setup page,
and set the parameters.
Check “Fixed Note.” If this is checked, tones
will always sound at the specified pitch.
If you set “Mode (Fixed Note Mode)” to
Trigger All Tones, playing a single note will
cause all Tones to sound. If you set “Mode
(Fixed Note Mode)” to Trigger As Played, the
notes you play will determine how Tones are
sounded.
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg X50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg X50 in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info