Manual Korg X50 (page 104 of 132) (English)

668615

104

Zoom out

Zoom in

1/132

Arpeggiator settings

In the GLOBAL 0: System, Preference page,

uncheck the Memory Protect “Combination”

check box. (☞p.88)

10.The “Status,” “MIDI Channel” and “Assign”

settings shown in the display of steps 2 and 3

can be made so that certain timbres will sound

only when the arpeggiator is On, and will be

silent when the arpeggiator is not Off.

Setting examples

Although this is a somewhat sophisticated editing

technique, we will describe the settings of one of

the preset combinations as an example.

Combination A021: Urban Nature RnB

Select combination A021: Urban Nature RnB, and

play it.

Before you play, make sure that the global MIDI

channel (GLOBAL 1: MIDI “MIDI Channel”) is set

to 01.

• Arpeggiator A is assigned to T (timbre) 4 and 5.

When you play the keyboard, the arpeggio pat-

tern Dr-Nature RnB will sound only the T4

program B004: Trance/GarageKit.

• The arpeggio pattern uses the Fixed Note set-

ting, which is appropriate when playing a drum

arpeggio. (“Fixed Note” is checked in, GLO-

BAL 5: Arp.Pattern, Setup page.) With this set-

ting, the arpeggio pattern will always play the

speciﬁed pitches regardless of the note numbers

received from the keyboard. (

☞

p.102)

• The A “Key Btm” and “Key Top” (COMBI 7:

Ed–Arp/Ctrls, Scan Zone page) are set so that

arpeggiator A will operate only for notes B3

and lower.

• Arpeggiator A is also assigned to T5, but this is

so that the T4 program B004: Trance/GarageKit

will sound only when the arpeggiator is on.

Notice the timbre settings for T4 and T5

• If the arpeggiator is off, playing the keyboard

will sound the timbre(s) that are set to Gch or

to the global MIDI channel (in this case, 01).

Since the “MIDI Channel” of T4 is set to 02, it

will not sound. T5 is set to Gch, but since “Sta-

tus” is Off it will not sound.

• Any MIDI channel that is assigned to a timbre

will trigger the arpeggiator. In this case, these

will be “MIDI Channel” 02 and Gch (global

MIDI channel). When the arpeggiator is on,

playing the keyboard will trigger arpeggiator A

which is assigned to T5 (Gch). T4 will be

sounded by arpeggiator A. Since the “Status”

of T5 is Off, it will not sound.

• Since the “Status” of T5 is Off, it will not

sound, regardless of whether the arpeggiator is

on or off. It is a dummy timbre that causes T4 to

sound only when the arpeggiator is on.

Combination B071: “In The Pocket”

Select and play combination B071: “In The

Pocket.”

Before you play, make sure that the global MIDI

channel (GLOBAL 1: MIDI “MIDI Channel”) is set

to 01.

• Arpeggiator A is assigned to T7 and T8, and

arpeggiator B is assigned to T5. When you play

the keyboard, the T7 program C004: HipHop

Kit will be sounded by the arpeggio pattern

Dr-In The Pocket. The T5 program A066:

Chord Trigger will be sounded by the arpeggio

pattern Bs-Echo.

• The B “Key Btm” and “Key Top” (COMBI 7:

Ed–Arp/Ctrls, Scan Zone page) are set so that

arpeggiators B will operate only for the G3

note and above.

• Arpeggiator B is assigned to T8 as well, but this

setting is so that the T7 program C004: HipHop

Kit will sound only when the arpeggiator is on.

See the preceding section “Combination A021:

Urban Nature RnB” (☞p.98).

Writing the arpeggiator settings

Arpeggio parameters you edited in Combination

or Multi mode are saved along with the settings

when you write the combination or multi set. For

the writing procedure, see “Saving your edits”

(☞p.61) for a combination, or to “Saving your

edits” (☞p.75) for a multi set.

Linking the arpeggiator to the com-

bination

If you want the arpeggiator settings of a combina-

tion to become active when that combination is

selected, check “Combi” for “Auto Arp” (GLO-

BAL 0: System, Basic page).

Status MIDI Channel Assign

T4 INT 02 A

T5 Off Gch A

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg X50 in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg X50 Manual

Product: