Manual Korg X50 (page 101 of 132) (English)

668615

101

Zoom out

Zoom in

1/132

The arpeggiator in Combination and Multi modes

Quick StartIntroductionSetupProgram

Combination

MultiEffectGlobalArpeggiatorDrum Kit

External control

Other functions

Appendices

Note: This value will be in effect when the

REALTIME CONTROLS C-mode [1] (ARP-GATE)

knob is in the center position (12 o’clock). Be sure

that the knob is in the center position when you

make this setting.

Setting the velocity of the arpeggiated

notes (Velocity)

“Velocity” lets you specify the velocity of the

arpeggiated notes. If this is set to Key, the velocity

with which you actually played the note will be

used. If a user arpeggio pattern is selected, you

can set this to Step. In this case, the value of the

“Vel(Velocity)” setting for each step (GLOBAL 5:

Arp.Pattern, Edit page) will be used.

Note: This value will be in effect when the

REALTIME CONTROLS C-mode [ARP-

VELOCITY] knob is in the center position (12

o’clock). Be sure that the knob is in the center

position when you make this setting.

Note: When a preload user arpeggio pattern is

selected, setting the “Gate” or “Velocity” to Step

will add a sense of groove to the arpeggio pattern.

Making the arpeggio pattern “shufﬂe”

(Swing)

“Swing” modiﬁes the timing of the even-num-

bered arpeggiated notes, letting you give a “shuf-

ﬂe” character to the pattern.

Editing in the PROG 7: Ed–Arp/Ctrls, Scan-

Zone page

• Access the PROG 7: Ed–Arp/Ctrls, ScanZone

page.

Specifying the range of notes in which

the arpeggiator will operate (Key Btm,

Key Top)

“Key Btm,” “Key Top”: The arpeggiator will oper-

ate when you play keys within the speciﬁed range.

Keys outside of this range can be played in the

normal manner, and will not be affected by the

arpeggiator on/off.

For example if you set “Pattern” to Preset-0: UP,

check “Latch,” set “Key Top” to B3, and “Key

Btm” to C-1, playing a note B3 or lower will trig-

ger the arpeggiator. Since “Latch” is on, the arpeg-

gio will continue even after you release the keys.

You can use the C4 and higher keys to play con-

ventionally along with the arpeggio sounded by

the B3 and lower keys. To change the arpeggio,

play keys in the range of B3 and below.

Specifying the range of velocities in

which the arpeggiator will operate (Vel

Btm, Vel Top)

“Vel Btm,” “Vel Top”: The arpeggiator will oper-

ate when you play notes with a velocity (playing

strength) that is within the speciﬁed range. Notes

played with a velocity outside this range will be

sounded normally, without regard to the arpeg-

giator on/off.

Writing (saving) the arpeggiator set-

tings

Arpeggio parameters you edit in Program mode

are saved along with the data when you write the

program. For details on how to write, see “Saving

your edits” (☞p.45).

Linking the arpeggiator to a program

You can specify whether the arpeggio settings writ-

ten in a program will also be selected when you

switch to that program, or whether the existing

state of the arpeggiator will be maintained. With

the factory settings, the former setting is selected. If

you want to use the latter setting, check Program in

“Auto Arp” (GLOBAL 0: System, Basic page).

The arpeggiator in Combina-

tion and Multi modes

In Combination and Multi mode, the X50 provides

dual polyphonic arpeggiator functionality that

lets you use two arpeggio patterns simulta-

neously. The settings in each of these modes are

made in the similar way.

As an example, the following explanation shows

how to make settings in Combination mode.

Using the arpeggiators as you play in

Combination mode

1. Press a [COMBI] button. (The button will light.)

You will enter Combination mode. (☞p.57

“Selecting combinations”)

As you select various combinations, you will

notice that the [ARP ON/OFF] button will light

for some combinations. When you play a key

on the keyboard, the arpeggiator will start.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg X50 in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg X50 Manual

Product: