668615

Korg X50 Manual

11
Zoom out
Zoom in
Previous page
1/132
Next page
Quick StartIntroductionSetupProgram
Combination
MultiEffectGlobalArpeggiatorDrum Kit
External control
Other functions
Appendices
Playing programs and combinations
5
Using controllers to modify the sound
You can operate the X50’s [MOD] wheel, [PITCH] wheel, [SW1][SW2], and realtime controllers
to add expressive variation to your performances.
[PITCH] wheel, [MOD] wheel
You can use the [PITCH] wheel and [MOD] wheel located at the upper left of the keyboard to
vary the pitch or adjust the depth of modulation. The actual result will depend on the program
and combination, but these controllers are normally used to apply the following effects.
REALTIME CONTROLS [1], [2], [3], [4], [SELECT]
Use the [SELECT] button to select realtime controller mode A/B/C, and use knobs [1]–[4] to
control the tone, effects, MIDI control changes, and arpeggiator etc. while you perform. Use
these knobs when you want to modify the sound while performing, or to make simple edits.
Here we’ll explain how to use the realtime controllers in Program mode.
1.
Press the [PROG] button. (The button will light.)
2.
Choose “Program Select” (program number and name), and turn the [VALUE] dial to select
the program that you want to control using the realtime controllers.
3.
Press the REALTIME CONTROLS [SELECT] button to light the “A” LED located at the right
of the button.
4. Turn knob [1] (LPF CUTOFF) to adjust the cutoff frequency of the low pass filter.
When you adjust the cutoff frequency of the filter, the brightness of the sound will change.
The effect will depend on the settings of the program parameters, but normally, rotating the
knob toward the left will darken the sound, and rotating it toward the right will brighten it.
5. Turn knob [2] (RESONANCE/HPF) to adjust the resonance level of a low pass filter or the
cutoff frequency of a high pass filter.
The content that is controlled will depend on the filter type specified by the program.
By adjusting the filter resonance level, you can increase or decrease the resonance level to add
a unique character to the sound.
Adjusting the cutoff frequency of the high-pass filter will modify the thickness of the sound
from which the low frequency range has been filtered out.
Raise the pitch
Lower the pitch
Deepen the
vibrato
[SELECT] button
Knobs [1]–[4]
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg X50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg X50 in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info