668615
8
Zoom out
Zoom in
Previous page
1/132
Next page
Quick Start
2
3.
Lower the X50’s [VOLUME] slider.
Turn on your audio monitor system and set the volume to a normal level.
4.
Turn on the X50 by pressing the power switch located on the rear panel.
5.
Slowly raise the X50’s [VOLUME] slider to an appropriate volume.
Playing programs and combinations
By default, Combination mode will be selected when you turn on the power.
Play the keyboard, and you will hear the sound of bank A combination number 000.
A combination consists of up to eight programs that are split, zoned, layered or velocity-
switched across the keyboard. A combination can also use up to two Arpeggiators simulta-
neously (a program can use only one Arpeggiator), letting you produce far more complex
sounds than a single program.
Although you could simply continue selecting and playing different combinations, let’s start by
selecting and listening to the “basic” sounds of the X50 – programs.
Note:
If you don’t hear any sound when you play the keyboard: Check the connections once
again. Also make sure that the X50’s VOLUME and the volume of your powered speakers or
stereo amp are turned up appropriately.
Selecting programs by bank and number
1.
Press the [PROG] button. (The button will light.)
This is the Program mode. Notice that the upper line of the display indicates “PROG 0: Play”
(mode name, page number and name).
2.
Make sure that “Program Select” (program number and name) is selected.
If this is not selected, use the ClickPoint [
π
][
] to highlight the “Program Select” indication.
3.
Turn the [VALUE] dial to select the program you want to play.
You can also press the center of the ClickPoint to highlight the field, then use [
π
][
] to select
a program, and press the center to finalize your selection.
4.
Press one of the PROG BANK [A]–[GM] button to switch banks.
1
23 5 4
Mode name Page number and name
Category number
and name
Tempo
Parameter name
Control assign listTab
Bank
number
Program
Select
(program
number
and name)
Tab name
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg X50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg X50 in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info