488479
43
Zoom out
Zoom in
Previous page
1/58
Next page
Sound Manager (MacOS)
Korg 1212 I/O 39
English
Sound Manager (MacOS)
Introduction
Digital audio software designed for the 1212 I/O can take advantage of all
the card’s advanced features, such as multitrack input and output and
ADAT timecode synchronization. Even if a program has not been
specifically written for use with the 1212 I/O, however, you may still use
the card for digital or analog sound input and output through Apple’s
Sound Manager. Some Sound Manager programs may not be compatible
with the 1212 I/O; for a list of supported programs, please see the 1212 I/O
Read Me file.
Sound Manager controls the basic sound input and output for the
computer as a whole, including system alert beeps, speech input and
output, game sounds, and so on. Through the Sound Manager, add-on
hardware, such as the 1212 I/O, can be used in place of the computer’s
built-in sound input and output.
When you are using the 1212 I/O through the Sound Manager, only two
channels are available for input and output (you can choose any two that
you want, separately for input and output). The 1212 I/O Utility is used to
select these input and output channels, and also to select the sample rate
and clock source for use with Sound Manager programs. ADAT timecode
synchronization is not available through the Sound Manager.
Sound Manager setup
Apple’s Sound control panel is included on the 1212 I/O floppy disk, in the
folder named “Install in System Folder.” This control panel is not
automatically installed with the MacOS system software, but for audio
cards, it works much better than the other sound-oriented control panels
(including Monitors & Sound and Sound & Displays).
For this reason, only the Sound control panel is recommended for
configuring the 1212 I/O and Sound Manager.
You can continue to use the Monitors & Sound and Sound & Displays
control panels for any purpose other than configuring the 1212 I/O for use
with Sound Manager.
To set up the Sound Manager to use the 1212 I/O:
1. Open the Sound control panel.
2. Select “Sound In” from the Sound control panel’s menu.
The Sound In page appears, with the on-screen instruction, “Choose a
source for recording.”
3. Select the 1212 I/O icon.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg SoundLink DRS 1212 I-O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg SoundLink DRS 1212 I-O in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg SoundLink DRS 1212 I-O

Korg SoundLink DRS 1212 I-O User Manual - German - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info