488479
36
Zoom out
Zoom in
Previous page
1/58
Next page
Applications
32 Korg 1212 I/O
English
Applications
This section provides brief, step-by-step instructions for the major
functions of the 1212 I/O. Many of these can be performed using the
simple 1212 I/O Utility program. Digital audio software written for use
with the 1212 I/O should allow you to access to all of the parameters
provided in the Utility program, so these tricks should work in those
programs as well.
All of the following instructions assume that you’ve followed this single,
very important step:
1. Enable Digital In on the ADAT system, and enable digital I/O for
any connected S/PDIF devices. If you are using an Alesis BRC, set
the digital I/O source and destination to ADAT.
This is necessary for almost any operation using the 1212 I/O.
Auto-Routing Mode
The 1212 I/O Utility can be used for routing audio directly from the card’s
inputs to the card’s outputs. For instance, you can route ADAT channels
through the card for doing dubs between ADATs, you can route ADAT
inputs to S/PDIF outputs (or vice versa), and so on.
Even when the 1212 I/O Utility isn’t active, however, the 1212 I/O will
route audio from input to output whenever it is not otherwise in use; this is
called the Auto-Routing Mode. On startup, the 1212 I/O will load a setup
from the 1212 I/O Preferences file. By default, this routes each input to the
same output, with internal clock source, 48kHz sample rate, and analog
input trims all the way up.
You can change these preferences by using the 1212 I/O Utility’s “Save As
Defaults...” command, as described on page 29.
When the 1212 I/O is being used by a 1212 I/O-compatible digital audio
application (such as Deck II or Cubase VST), the Auto-Routing Mode will
be disabled. 1212 I/O-compatible applications can use the routing for their
own purposes, including record monitoring.
When you quit the application, the Auto-Routing Mode will be restored.
On MacOS computers, with some Sound Manager applications, the
enabling and disabling of the Auto-Routing Mode works slightly
differently. These Sound Manager applications use the card only when
actually playing a sound; when the sound stops, the Sound Manager will
“quit” the 1212 I/O. At this point, the 1212 I/O will go into Auto-Routing
Mode.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg SoundLink DRS 1212 I-O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg SoundLink DRS 1212 I-O in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg SoundLink DRS 1212 I-O

Korg SoundLink DRS 1212 I-O User Manual - German - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info