488479
32
Zoom out
Zoom in
Previous page
1/58
Next page
1212 I/O Utility
28 Korg 1212 I/O
English
Mute All
Pressing this button mutes all the inputs, so that all inputs receive only the
purest, cleanest, most eminently silent digital black. Pressing the button
again restores the previous settings of the window.
Through All
Pressing this button sends all inputs to their corresponding outputs, so that
ADAT 1 in goes to ADAT 1 out, ADAT 2 in to ADAT 2 out, and so on. All
volumes are set to full, and all phases are set to normal. Pressing the button
again restores the previous settings of the window.
File Menu
You can save the settings in the 1212 I/O Utility’s window as a document
on disk. Use this to store frequently used configurations of channel routing
and mixer settings.
New
This command creates a new, untitled 1212 I/O configuration, with all
parameters set to their default settings.
Open
This command brings up the standard Open dialog, allowing you to load a
previously saved 1212 I/O setup from disk.
If a document is currently open, selecting the Open command will
automatically close the document. If the document has been edited, you
will be prompted to save your edits before the document is closed.
Opening a document sets all the parameters in the 1212 I/O to match the
settings in the document, so that what you see on the screen always
matches what’s going on in the card itself.
If you have multiple 1212 I/O cards installed in your computer, the
parameters for all of the cards are stored in a single file. If the file that you
are opening has parameters for a different number of cards than are
currently installed, a warning message will appear, and the file will load as
best as it can.
This works slightly differently under the MacOS and Windows 95.
On the MacOS, if the file contains parameters for three cards, but only two
are currently installed, then the parameters for the file’s third card will be
ignored. If the file contains parameters for two cards, but three are
currently installed, the parameters for the third card will be set to default
values.
Under Windows 95, the parameters in a multi-card file are always restored
to the same PCI bus/device location. If no 1212 I/O card is in the stored
location, then the settings for that card are ignored. If a card is in a location
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg SoundLink DRS 1212 I-O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg SoundLink DRS 1212 I-O in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg SoundLink DRS 1212 I-O

Korg SoundLink DRS 1212 I-O User Manual - German - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info